Download Manual

ADASH Ltd.
Adash 4900 – Vibrio M
Fig. Placement of batteries
Fig. Proper cell polarity
Connecting the Vibration Sensor
To measure a vibration signal we need to connect a vibration sensor with ICP powering. The A4900 Vibrio M is supplied and calibrated with a standard accelerometer with 100 mV/g sensitivity. The
instrument is equipped with its own source of ICP power for the connected sensor. The sensor needs
to be connected at the right input socket with the supplied cable.
Fig. The instrument with the connected sensor
21
Further technical and contact information can be found at www.adash.com