Download WHEN IT COMES TO SAFETY.

P. 42
DETECTION
DRÄGER PAC 7000
Dräger Pac 7000
Small and robust, ergonomic and intuitive, economic and powerful the Dräger Pac
7000 is tailor-made for personal monitoring in the workplace. The innovative gas
detector is equipped with a wide range of different applications and is suitable for
many tasks in the field. The detector is an impressive instrument offering a high level
of reliability and rapid warning against harmful concentrations of CO, CO2, Cl2, HCN,
H2S, NH3, NO2, O2, PH3, SO2.
ST-1758-2005
Small, robust and safe
The size and robustness of this instrument
make it particularly suitable for use in the
field. This ergonomic instrument meets the
requirements of IP 65. It is housed in a
shockproof rubber housing and is resistant
to corrosive chemicals. It can be securely
fastened to clothing with a crocodile clip.
Dräger Pac 7000:
Unrestricted with
high performance.
Long life
By changing the sensors the Dräger Pac
7000 can be operated over an unlimited
period.
Adjustable operating times
In addition the instrument offers the
possibility of setting an individual operating
time (in days), e.g. a calibration interval,
inspection interval or individual operating
time.
Easy operation
By means of a two button control.
Four-digit concentration display
The concentration display is language free
with large figures or signs making it easy
to read.The display continually shows
current gas concentrations. Average peak
concentrations can be shown as well as
short term exposition of the monitoring
period.
New sensor technology
The Dräger Pac 7000, like all product
families, is equipped with new sensor
technology “en miniature“. The new Dräger
XXS sensors react rapidly and show
emerging gas hazards immediately. The
sensor is located in a housing such that
gas can enter from the top or the front.
Diverse functions
If the two adjustable alarm thresholds
of TWA or STEL concentrations are
exceeded the instrument gives off an
audible, visual and vibrating alarm signal.
Bump test mode
A functional test can be undertaken
manually or automatically with the
integrated Bump Test Mode and a Bump
Test station. If a function test is necessary
instructions will appear on the display. The
test interval can be adjusted by the user.
Data logger
The Dräger Pac 7000 has a databank
which stores incoming concentrations
and results with date and time. Peak
concentrations are documented in
variably adjustable time intervals.
Information can be downloaded to a PC
using Dräger Pac Vision or Dräger
CC-Vision software.
Simple calibration and configuration
Fresh air and a sensitivity calibration can
be undertaken directly on the instrument
(preferably protected with a password).
Via an IR interface and using Dräger Pac
Vision or Dräger CC-Vision software
all functions can be configured and
calibrations done on a PC.