Transcript
LMC-500 MAGIC LED CONTROLLER User’s Manual Product Features: ● Small and exquisite design, easy for operation and installation. ● Light your life with Magic LED controller and drive your car on the amazing road. ● Amazing 10 functions which switch by one button and show light display changing on controller, flash/strobe/fade/smooth/dimmable….. ● Match well with various LED strip light, LED accent light and LED DRL. Product Description: ● Input Volts: DC 12V/24V , Suitable for 12V and 24V Vehicle. ● Output Power: 24W (Max.) ● With 3M adhesive tape. ● Operating ambient temperature: －40℃ ~ ＋50℃ ● Case material & size: ABS (Black color) / 46x28x14mm (LxWxH) ● Wire Length: 120cm (Input) , 300cm (Output). Installation Instruction: ● Install and fix controller indoor of car and near by driver’s seat for easy operation. ● Install this product to led light directly, please do not connect with other wires. ● Touch MODE button slightly for each display changing, after 2sec. will be OFF. ● If there is no working for display light, please double check all wires. Warning: ● Keep off entering water and defend against the sun. ● Please install this product according to user’s manual and also by professional shops. ● Installation carefully and do not pull wire excessively, in order to avoid any damage of wire. ● Our company will not be responsible for the damage of changing product.
