Download MS-SERIES Mechanical Dial Scale www.escali.com
Transcript
PRODUCT MANUAL MS-SERIES Mechanical Dial Scale www.escali.com Thank you for purchasing the Escali MS-SERIES Mechanical Dial Scale! Please read the following operation information to ensure the proper function of your new scale. INITIAL SETUP 1. On the front of the scale, adjust the tare dial located on the shatter resistant lens to position zero at the top and center of the dial. 2. Adjust the red needle with the calibration dial, located beneath the stainless steel platform, to zero. HOW TO WEIGH 1. Place item gently onto the stainless steel platform. 2. The weight of the item will be indicated by the red needle. HOW TO USE THE “TARE” FEATURE This feature allows the display to be zeroed out after you weigh an item in a container. It shows the weight of additional items as if you were to weigh them separately. 1. Place an empty container gently onto the stainless steel platform. 2. Use the tare dial located on the front of the scale to rotate the measuring disk and re-align the red needle to zero weight. 3. Gently add an item to the container; the display will now only show the weight of the item. 2 4. Repeat steps 2 and 3 when adding more items to the container. PROPER USE & CARE Use and stow the scale at room temperature. Use on a flat, level, and stable surface. The scale is an instrument of precision. Do not submit the scale to shaking, excessive vibration or other rough treatment. Disassembling, or tampering with the scale voids the warranty. Clean the scale with a damp cloth. Do not submerge in liquid; the scale is not waterproof. PRODUCT SPECIFICATIONS Model: MS2 Capacity: 32 oz (2 lb) Graduation: 1/8 oz Units: Ounces Product Dimensions 6.63” x 7” x 8.5” Platform Dimensions 6” x 4.63” Model: MS5 Capacity: 5 lb (80 oz) Graduation: 1/2 oz Units: Pounds, Ounces Product Dimensions 6.63” x 7” x 8.5” Platform Dimensions 6” x 4.63” Model: MS25 Capacity: 25 lb Graduation: 1/8 lb (2 oz) Units: Pounds Product Dimensions 6.63” x 7” x 8.5” Platform Dimensions 6” x 4.63” Model: MS50 Capacity: 50 lb Graduation: 1/4 lb (4 oz) Units: Pounds Product Dimensions 6.63” x 7” x 8.5” Platform Dimensions 6” x 4.63” ESCALI CORPORATION 3203 Corporate Center Drive, Suite 150 Burnsville, MN 55306 USA PRODUCT SUPPORT 24/7 Online support: https://escali.zendesk.com Email support: [email protected] Phone support: 1-800-467-6408 2 YEAR PROFESSIONAL GUARANTEE This scale is guaranteed to be free of defects in materials and workmanship. For more details visit: www.escali.com/warranties Escali’s liability is limited to two (2) times the cost of the product. © Escali Corp., Minneapolis, MN, USA. All rights reserved. Escali, the Escali logo and other Escali marks are owned by Escali Corp. and may be registered. 4