1
Download 1. General laboratory consumables
Transcript
1. General laboratory consumables GENERAL CATALOGUE EDITION 19 Vessels/Spray, dropping bottles 1 1 VITsafe™ Safety wash bottles, narrow neck, PP/PE-LD Bottles made from PE-LD, spray tube from PP. Safer due to the durable safety imprint in VITLAB accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: Material name in German, English, French and Spanish, Chemical formula, CAS No., hazard pictogram, signal word, Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code. Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the bright red VENT-CAP screw cap, the design of which prevents almost all static overpressure. Label Acetone Acetone Acetone Acetonitrile Distilled water Distilled water Distilled water Ethanol Ethanol Ethanol Ethyl acetate Ethyl acetate Ethyl acetate Acetic acid Isopropanol Isopropanol Isopropanol Methanol Methanol Methanol Methylene chloride Methylethylketone (MEK) N, N-Dimethylformamide Xylene Hexane Heptane Tetrahydrofuran (THF) Toluene Pentane 2 Capacity ml 250 500 1000 500 250 500 1000 250 500 1000 250 500 1000 500 250 500 1000 250 500 1000 500 500 500 500 500 500 500 500 500 Neck thread GL 25 25 32 25 25 25 32 25 25 32 25 25 32 25 25 25 32 25 25 32 25 25 25 25 25 25 25 25 25 Material PK Cat. No. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.223 345 9.223 351 9.223 360 7.058 640 9.223 340 9.223 346 9.223 355 9.223 344 9.223 350 9.223 359 9.223 343 9.223 349 9.223 358 7.079 737 9.223 342 9.223 348 9.223 357 9.223 341 9.223 347 9.223 356 7.078 722 9.223 354 6.401 458 7.087 939 7.009 310 6.073 505 7.087 940 7.087 938 6.242 784 PP PP PP PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PP PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD PE-LD Dropper bottles, PE-HD 2 Natural. Without PE-HD combination closure with screw-on dropping tip which must be ordered separately. Highly suitable for adhesives and other liquids that can be finely dispensed. Capacity ml 10 25 50 3 Diam. mm 24.0 31.3 40.0 Kautex PK Cat. No. 1 1 1 9.073 310 9.073 311 9.073 312 Cap for dropping bottles, PE-HD 3 For bottles 9.073 310 to 9.037 312 series. Kautex Type Cap for dropping bottles E & OE. PK Cat. No. 1 9.073 313 91
