Download User manual

6
6.7
Setup and Reset
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.7.1 Configuring Power LED On
1
When the Function Key Guide appears, select [
] by pressing [
] button on the DOME Type JOG
Button.
Next, press the [
2
3
] button.
Press [
] button to move to SETUP&RESET and press [
Press [
] button to move to Power LED On and press [
] button on the monitor.
] button on the monitor.
The following screen will appear.
SETUP&RESET
Set the status of the
power LED.
Reset All
Off
Eco Saving Plus
Off Timer
PC/AV Mode
Key Repeat Time
4
Working
Power LED On
Stand-by
Auto

Working: The power LED is on when the product is turned on.

Stand-by: The power LED is on when the product is turned off.
Move the focus to the desired option by pressing [
Press [
5
Source Detection
] button on the DOME Type JOG Button.
] button.
The selected option will be applied.
6 Setup and Reset
71