Download Airdata 300 Access Point

Airdata 300 Access Point
Auto MAC Clone
If this function is enabled, the access point will
automatically clone the MAC address of the wireless
clients which is the first one to associate to the access point
while the access point is powered on.
After you finish with the settings, please click ‘Apply’, and the following message
will be displayed:
When you see this message, the settings you made are successfully saved. You can
click the ‘Continue’ button to go back to the previous page and continue on other
setting items, or click the ‘Apply’ button to restart the wireless access point and the
changes will take effect after about 30 seconds.
2.4.2.1 Wireless Site Survey
The table will list the access points nearby as the access point is set to Station mode;
you can select one of the access points to associate.
18