Download SBE Data Processing - Sea

Manual revision 7.23.2
Appendix I: Command Line Options, Command Line Operation, & Batch File Processing
SBE Data Processing
Command Line Operation
The following modules can be run from the command line (default location for
files is c:\Program Files\Sea-Bird\SBEDataProcessing-Win32):
Module
Executable File Name
Align CTD
AlignCTDW.exe
ASCII In
ASCII_InW.exe
ASCII Out
ASCII_OutW.exe
Bin Average
BinAvgW.exe
Bottle Summary
BottleSumW.exe *
Buoyancy
BuoyancyW.exe
Cell Thermal Mass
CellTMW.exe
Data Conversion
DatCnvW.exe
Derive
DeriveW.exe
Derive TEOS-10
DeriveTEOS_10W.exe
Filter
FilterW.exe
Loop Edit
LoopEditW.exe
Mark Scan
MarkScanW.exe
SeaCalc III
SeaCalcII.exe
Sea Plot
SeaPlotW.exe
Section
SectionW.exe
Split
SplitW.exe
Strip
StripW.exe
Translate
TransW.exe
Wild Edit
WildEditW.exe
Window Filter
W_FilterW.exe
* Bottle Summary’s executable file name was previously RosSumW.exe.
BottleSumW.exe will run if BottleSumW.exe or RosSumW.exe is typed on
command line.
Note:
The default program setup (.psa) file is
the last saved .psa file for
the module. PostProcSuite.ini contains
the location and file name of the last
saved .psa file for each module.
- Primary PostProcSuite.ini file default
location, if available, is:
%LOCALAPPDATA%\
Sea-Bird\IniFiles\
(Example
c:\Users\dbresko\AppData\Local\
Sea-Bird\IniFiles\PostProcSuite.ini)
- Secondary PostProcSuite.ini file
default location is:
%APPDATA%\Sea-Bird\IniFiles\
(Example
c:\Documents and Settings\
dbresko.SEABIRD\Application Data\
Sea-Bird\IniFiles\PostProcSuite.ini)
Command line parameters can be used to override existing information in the
.psa file. The command line parameters are:
Parameter
Description
Use String as instrument configuration (.con or .xmlcon) file.
/cString String must include full path and file name. Note: If using
/cString, must also specify input file name (using /iString).
Use String as input data file name. String must include full
path and file name.
This parameter supports standard wildcard expansion:
•
? matches any single character in specified position within
/iString
file name or extension
•
* matches any set of characters starting at specified
position within file name or extension and continuing until
end of file name or extension or another specified character
/oString Use String as output directory (not including file name).
/fString Use String as output file name (not including directory).
Append String to output file name (before file name
/aString
extension).
Use String as Program Setup (.psa) file. String must include
/pString
full path and file name.
Use String to define an additional parameter to pass to
Module. Not all modules have x parameters; see module
/xModule: descriptions. If specifying multiple x parameters, enclose in
String
double quotes and separate with a space.
Example: Run Data Conversion from command line, telling it to
skip first 1000 scans: datcnvw.exe /xdatcnv:skip1000
/s
Start processing now.
If specifying multiple parameters, insert one or more spaces or tabs
between each parameter in the list.
136