Download Operating Manual

Operating Manual
Select to set up initial system zero
The ‘POT 1’ function sets up an initial zero setting using an electronic ‘potentiometer’.
Once set at the factory this should not need to be re-set during the operational life of
the iGAS100.
Select to set up initial system Gain
The ‘POT 2’ function sets up an initial gain setting using an electronic ‘potentiometer’.
Once set at the factory this should not need to be re-set during the operational life of
the iGAS100
Select to test relay output function
This option will energise all the output relays for a short period. Note this feature is
only operational on models fitted with relay outputs.
Select to return the iGAS100 to normal operational mode.
28