Download Manual

MAINTENANCE AND LUBRICATION
Correct maintenance and lubrication prolongs the life of your cultivator and should therefore
be followed closely.
Then engine of your Pro 420 has a running-in period of 5 working hours. After 5 hours the
engine oil should be replaced and thereafter the shifting interval is every 50 hours or once a
year. Check the oil lever every time before you start your machine.
Check the oil on the transmission box every 50 hours and replace after 300 working hours
(figure 8, no. B)
Use a 80/90 transmission oil. The transmission oil shall be fill to the screw. Drain oil from the
transmission box by unloosening the drain plug. (figure 9, no. 1).
If there are any signs of leakage, moist extracts ets, the oil shall be checked immediately.
The transmission oil on the rotary tiller shall also be checked every 50 hours and replaced
after 300 working hours. Use the same oil as on the transmission box. (figure 11)
OPERATION FEATURES
8.
9.
10.
11.
12.
13.
14.
Clutch
Gas
Turnable handlebar
PTO connection
Transmission
Forward / reverse
Adjustable handlebar
WINTER STORAGE
-
If the machine is not to be used for a longer period of time the following prescription shall
be followed.
Clean all external parts on the machine. Any damages should be repaired before
storage.
All moving parts shall be lubricated with oil with good penetrating abilities in order to
avoid corrosion.
Empty the carburettor and fuel system of fuel by letting the engine run dry.
-
Dismount the sparking plug and pour 50 ml of oil into the opening. Draw the starting cord
until you feel resistance. Thereby you avoid corrosion in the cylinder.
Change oil on engine and transmission.
-
Cover the machine and place it in a dry and clean room.
-