Download RVCF - QSG - ENG. 31_03_11.qxd:_

RVCF Quick Start Guide
Chapter 2:
Software Index
2.1 Operation Instruction of the keypad
:LED Light Lit
Power On
:LED Light Flash
Power Voltage
(*1)
5 second later or Enter operation signal or Press DSP to modify frequency.
Hz/RPM
Frequency/Speed
/Line Speed
∧ ∨ <
RUN/STOP
Hz/RPM
Frequency/Speed
/Line Speed
Hz/RPM
(*3)
Frequency/Speed
/Line Speed
READ/ENTER
(*2)
DSP
FUN
Selecting the
parameter group
READ/
ENTER
∧ ∨
DSP
FUN
Parameter Setting
FUN
Selecting the
parameter group
DSP
READ/
ENTER
END
DSP
Output Voltage
DC Voltage
VOLT
VOLT
DSP
Build-in PLC Status
Output Current
AMP
(*4)
*1:
*2:
*3:
*4:
The inverter will flash the current setting of 0-07 (power supply voltage) after power up.
4-04, 4-05 determines the displaying of frequency, speed or line speed.
It is not necessary to press ENTER key when stopped for modification. Refer to example 1, 2.
Whether output current, output voltage, DC voltage, status of built-in PLC is displayed or not is determined by 4-00 ~
4-03 respectively.
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.310311
17