Download ML10 User Manual

Transcript
Initialize Lock
Method 1
Operating Steps
Method 2
Indication of the lock
Press the "Reset" button with
a pin.
Touch the infrared sensor hole
to power on the lock
Fingerprint sensor is
power on LED blinks
green
Loosen the pin.
Press the button of "+", "1",
"2", "3" , "-".in order
One beep for each
pressing, back LED
blinks green
Initialization succeed
A long beep, LED blinks
green for 1 second
Operating Steps
Delete all Temporary
Users.
Please see “Delete
Temporary Users”.
Delete all Normal Users
Please see “Delete
Normal Users”.
Delete all Admin Users..
Please see “Delete
Admin Users”.
Reset successfully
Note: The lock will be restored to factory defaults after initialization, and the door can be opened
with any fingerprint.
5