Download Apollo User Manual

ISO 7176-15:1996 REQUIREMENTS FOR INFORMATION DISCLOSURE
DOCUMENTATION AND LABELLING
MANUFACTURER: Invacare Limited
ADDRESS: South Road. Bridgend Industrial Estate. Bridgend. Mid Glamorgan. CF31 3PY
MODEL DESIGNATION:
APOLLO Mk11 INDOOR/OUTDOOR POWERCHAIR
MAXIMUM OCCUPANT MASS (WEIGHT):
100Kg
ISO TEST
METHOD
REQUIREMENT
Overall Length with Legrest
ISO 7176
Pt 5
ISO 7176
Pt 5
ISO 7176
Pt 5
ISO 7176
Pt 5
ISO 7176
Pt 5
ISO 7176
Pt 5
EN12184
7.7
ISO 7176
Pt 1
ISO 7176
Pt 1
Overall Width
16in Wide
17in Wide
18in Wide
19in Wide
20inWide
Folded Length
15in Wide
Folded Width
Folded Height
Total Mass (Weight)
Mass (Weight) of the Heaviest
Part
Static Stability Downhill
Static Stability Uphill
MIN
MAX
ISO TEST
METHOD
980mm 1020
ISO 7176
mm (ii)
(i)
Pt 7
590mm 590mm
615mm 615mm
640mm 640mm
665mm 665mm
690mm 690mm ISO 7176
715mm 715mm Pt 7
745mm 745mm ISO 7176
Pt 7
ISO 7176
400mm 400mm
Pt 7
ISO 7176
740mm 740mm
Pt 7
ISO 7176
58Kg
65Kg
Pt 7
ISO 7176
11.5Kg 11.5Kg
Pt 7
ISO 7176
22deg 25deg
Pt 7
ISO 7176
21deg 21deg
Pt 7
Static Stability Sideways
ISO 7176
Pt 1
ISO 7176
Pt 4
ISO 7176
Pt 2
ISO 7176
Pt 10
ISO 7176
Pt 6
ISO 7176
Pt 3
22deg
Energy Consumption (Range)
17km
Dynamic Stability Uphill
G
Obstacle Climbing
Maximum Speed Forward
mm
6.4
km/h
Minimum Braking Distance From
Maximum Speed
1.08mm
22deg ISO 7176
Pt 7
ISO 7176
17km
Pt 7
ISO 7176
6°
Pt 7
ISO 7176
mm
Pt 5
6.4 ISO 7176
km/h Pt 5
REQUIREMENT
MIN
MAX
4deg
4deg
417mm
442mm
467mm
492mm
517mm
542mm
410mm
435mm
460mm
417mm
442mm
467mm
492mm
517mm
542mm
410mm
435mm
460mm
Seat Plane Angle
Seat Width
15in Wide
16in Wide
17in Wide
18in Wide
19in Wide
20inWide
Seat Depth
16in Deep
17in Deep
18in Deep
Seat Surface Height at Front
Edge
Backrest Angle
Backrest Height
Footrest to Seat Distance
Leg to Seat Surface Angle
Armrest to Seat Distance
Front Location of Armrest
Structure (Front Armrest to
Backrest)
Handrim Diameter
Horizontal Location of Axle
Minimum Turning Radius
Turn Around Width Between
Limiting Walls
(i) Without Anti Tippers
(ii) With Anti Tippers
The Wheelchair conforms to the following standards :
ISO 7176 Pt 8
Static, Impact and Fatigue Strength
ISO 7176 Pt 9
Climatic Tests
ISO 7176 Pt 14
Power and Controls
Resistance to Ignition
ISO 7176 Pt 16
480mm 480mm
14deg
14deg
523mm 523mm
345mm 445mm
107deg 107deg
225mm 225mm
420mm 420mm
N/A
N/A
90mm
90mm
870mm 870mm
1110
mm
PASS
PASS
PASS
PASS
1110
mm