Download ANDROID SMARTPHONE

Pair Bluetooth Devices
Disconnect a Paired Device
The Bluetooth pairing process allows you to
establish trusted connections between your device
and another Bluetooth device.
Disconnecting a paired device breaks the
connection between the device and your device, but
retains the knowledge of the pairing. At a later point
when you wish to reconnect the device, there is no
need to setup the connection information again.
Pairing between two Bluetooth devices is a onetime process. Once a pairing is created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
1. From a Home screen, tap
Settings.
1. From a Home screen, tap
Settings.
Apps >
2. Tap Bluetooth, and then tap ON/OFF to turn on
Bluetooth.
Apps >
3. Tap the previously paired device.
2. Tap Bluetooth, and then tap ON/OFF to turn on
Bluetooth.
4. Tap OK to confirm disconnection.
3. Make sure that the target device is discoverable,
so that your device can find it. Refer to the
instructions that came with the device to find out
how to set it to discoverable mode.
Delete a Paired Device (Unpairing)
When you unpair from a Bluetooth device, the two
devices will no longer recognize each other. To
connect again, you’d need to pair the devices.
4. Tap Scan. Your device will start to scan for
Bluetooth devices within range.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap
next
to the previously paired device, and then tap
Unpair to delete the paired device.
5. When you see the name of the target device
displayed in the Bluetooth devices section, tap
the name. Your phone then automatically tries to
pair with the target device. If automatic pairing
fails, enter the passcode supplied with the target
device.
Review Files Received via
Bluetooth
Note: Due to different specifications and features
of other Bluetooth-compatible devices, display and
operations may be different, and functions such as
transfer or exchange may not be possible with all
Bluetooth compatible devices.
When you receive files from another device via
Bluetooth, you can access them from Bluetooth
settings.
1. From a Home screen, tap
Settings.
2. Tap Bluetooth >
Received files.
Apps >
More options >
Bluetooth Status Indicators
This Status bar icon shows your current Bluetooth
connection status:
Bluetooth is active.
Settings
64
Bluetooth