Download "user manual"

Transcript
Glossary
G
bar code density
Number of data characters that can be represented in a linear unit of measure.
Bar code density is often expressed in characters per inch.
bar code label
A label that contains a bar code symbol.
bar code symbology
A scheme for encoding data as bar code. Code 39, Codabar, UPC/EAN, and
Interleaved 2 of 5 are examples of different symbologies.
battery pack
See lithium-ion battery pack.
baud rate
The number of discreet conditions or signal events per second. In RS-232 and
RS-422/485 systems, baud rate is the same as bits per second (bps).
binary file
A file that contains a sequence of 8-bit data characters or executable code.
Compare to ASCII text file. Binary files require special software for
transmission.
boot
Usually means to invoke a bootstrap process, which involves building up a
system from some simple preliminary instructions or information. A boot
invokes the BIOS boot sequence, clears all memory, and performs a complete
power-on self test (POST) to ensure that the hardware and peripherals are
operational. A boot initializes the system hardware for use by the system
firmware and loads the default configuration currently stored in flash memory.
bridge
An internetworking device that incorporates the physical and data link layers
of the OSI model and allows you to connect networks or subnetworks with
similar architectures.
broadcast
A type of transmission in which a message sent from the host is received by
many devices on the system.
G-5