Download Instruction Manual

Transcript
PROBLEM
LIKELY CAUSE
SOLUTION
9. Uneven cut and poor grass collection
– cutting deck not parallel to the ground
–
–
–
–
8. The blades do not engage or do not stop promptly
when they are disengaged
oblems with engagement mechanism
– blade cuts badly
– forward speed too high compared to the height
of the grass
– collector channel is blocked
10. Unusual vibrations while working
11. Uncertain or ineffective braking
12. Erratic forward movement, poor drive when going
uphill or if the machine has
a tendency to rear up
13. With the engine running, the machine does not
move when the drive pedal is pressed
(for hydrostatic drive models)
– cutting deck is full of grass
– blades are unbalanced or loose
– bolts and screws are loose
– the brake is not adjusted correctly
– problems with the belt or the engagement device
– move the disengagement lever to position «B»
If problems continue after having carried out these operations, contact your dealer.
WARNING!
– contact Your Dealer
check the tyre pressure ( 5.3.2)
realign the cutting deck ( 6.3.1)
contact Your Dealer
reduce forward speed and/or raise the cutting deck
( 5.4.5)
– wait for the grass to dry
– remove the grass-catcher and empty the collector
channel ( 5.4.7)
– clean the cutting deck ( 5.4.8)
– contact Your Dealer
– check and tighten all the engine and frame bolts
– contact Your Dealer
– contact Your Dealer
– move it to position «A» (
4.33)
Do not take on complicated repair work if you don't have the necessary equipment or the technical
knowledge. The warranty is automatically voided and the manufacturer is not held responsible if repairs are done
badly.
EN 34