Download SDI-DVI-2SFP User manual

SDI-DVI-2SFP
Dual optical SDI to DVI converter
User manual
Rev. C
Nevion
Nordre Kullerød 1
3241 Sandefjord
Norway
Tel: +47 33 48 99 99
nevion.com
SDI-DVI-2-SFP
Rev. B
Nevion Support
Nevion Europe
Nevion USA
P.O. Box 1020
3204 Sandefjord, Norway
Support phone 1: +47 33 48 99 97
Support phone 2: +47 90 60 99 99
1600 Emerson Avenue
Oxnard, CA 93033, USA
Toll free North America: (866) 515-0811
Outside North America: +1 (805) 247-8560
E-mail: [email protected]
See http://www.nevion.com/support/ for service hours for customer support globally.
Revision history
Current revision of this document is the uppermost in the table below.
Rev.
Repl.
Date
Sign
C
B
A
B
A
-
2014-05-22
2014-02-24
2012-02-28
AJM
SHH
AJM
Change description
Minor updates before release
Updated manual
First version
nevion.com | 2
SDI-DVI-2-SFP
Rev. B
Contents
Revision history ........................................................................................................ 2
1 Product overview ................................................................................................... 4
2 Specifications ........................................................................................................ 5
2.1 General ......................................................................................................................... 5
2.1 Optical Input .................................................................................................................. 5
2.2 Electrical Outputs .......................................................................................................... 5
2.3 Standards...................................................................................................................... 5
3 Operation............................................................................................................... 6
4 Configuration ......................................................................................................... 7
5 Connections .......................................................................................................... 8
5.1 Mounting the connector module .................................................................................... 8
5.2 Terminal ports ............................................................................................................... 8
5.3 Cable adapter ............................................................................................................... 9
5.3.1 HDMI type A ............................................................................................................... 9
5.3.2 DVI-D ......................................................................................................................... 9
6 Module status ...................................................................................................... 10
6.1 GPI ALARM – Module Status Outputs..........................................................................10
6.1.1 GPI connections ........................................................................................................10
6.2 Front panel – Status monitoring ...................................................................................11
General environmental requirements for Nevion equipment .................................. 12
Product Warranty.................................................................................................... 13
Appendix A Materials declaration and recycling information .................................. 14
A.1 Materials declaration ....................................................................................................14
A.2 Recycling information...................................................................................................14
nevion.com | 3
SDI-DVI-2-SFP
Rev. B
1 Product overview
SDI-DVI-2-SFP will convert optical SDI signal into DVI-D or HDMI. The DVI and HDMI output
can be used to feed a monitor for monitoring application.
Used together with DVI-SDI-2-SFP this card can be used as an optical extender for
transporting DVI signal.
The optical receiver can be combined with Flashlink CWDM-18 filter making it possible to
transport 18 DVI signal over one fiber. The optical receiver is a dual SFP and can be hotswapped from the backplane.
Optical input 1
HDMI/DVI output 1
Optical input 2
HDMI/DVI output 2
Microcontroller
Remote control
Figure 1 Block diagram of the SDI-DVI-2 converter
nevion.com | 4
SDI-DVI-2-SFP
Rev. B
2 Specifications
2.1 General
Power
+5V DC / 3W, max
Control
Control system for access to setup and module status
with BITE (Built-In Test Equipment)
Temperature range
0 to +40 °C
2.1 Optical Input
Number of inputs
2
Connector
LC/UPC
SFP type
Nevion Video SFP range, Dual receiver
See SFP datasheet for additional specifications
2.2 Electrical Outputs
Number of outputs
2
Connector
HDMI type D
HDMI type A with use of adapter cable
DVI-D with use of adapter cable
Supported format
525i/ 625i
720p/ 1080i, 50/ 59.94/ 60Hz
1080p, 50/ 59.94/ 60Hz
Number of bits
24bit (3x8bit)
Bandwidth
150MHz
Format
RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
RGB Range
Full or SMPTE
Audio de-embedding
2 channels, AES 1 group. L-PCM, 48kHz
2.3 Standards
SMPTE292M, SMPTE259M, SMPTE297M, SMPTE425A, SMPTE425B, SMPTE424M
nevion.com | 5
SDI-DVI-2-SFP
Rev. B
3 Operation
Optical input 1
Optical to
electrical
converter
Re-clocker
Audio deembedder
Video
SDI to DVI/HDMI
converter
Video
Audio
Optical input 2
Optical to
electrical
converter
Re-clocker
Audio deembedder
Video
SDI to DVI/HDMI
converter
HDMI/DVI output 1
Video
Audio
HDMI/DVI output 2
The optical SDI signal is converted into an electrical signal by the dual optical receiver SFP.
The audio is de-embedded from the SDI signal and sent to the output connector. The SDI
video is converted to DVI/HDMI. In HDMI the audio is available on the output while in DVI
mode no audio is available on the output.
nevion.com | 6
SDI-DVI-2-SFP
Rev. B
4 Configuration
The correct configuration can either be set with a DIP switch or with the GYDA Control
System. The layout of SDI-DVI-2 is shown in the drawing below with the DIP switch to the
upper left position.
Figure 2 SDI-DVI-2 board layout
Switch #
Label
Function, DIP = ON
Function, DIP = OFF
Comment
1
DIP1
HDMI
DVI
Selects output format
2
DIP2
To be defined
3
DIP3
To be defined
4
DIP4
To be defined
5
DIP5
To be defined
6
DIP6
To be defined
7
DIP7
To be defined
8
OVR
Override GYDA
control.
Configuration with
DIP switch
GYDA control.
Configuration with
GYDA
Select configuration
from GYDA
All DIP switches are off when pointing towards the release handle.
nevion.com | 7
SDI-DVI-2-SFP
Rev. B
5 Connections
Figure 3 Connector module for SDI-DVI-2
5.1 Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for the subrack frame FR-2RU-10-2.
This manual is also available from our web site:
http://www.nevion.com/.
5.2 Terminal ports
The connector module must be fitted with three SFP’s. SFP3 is for the dual optical receiver
module. While the SFP1 and SFP2 are for the HDMI/DVI SFP. The HDMI/DVI SFP are fitted
with an HDMI type D connector, if other connect are preferred see chapter 5.3 for alternatives.
Terminal
Function
Supported Format
Mode
SFP3
Optical input
Optical SD/HD/3G-SDI
Input
SFP1
Electrical output
HDMI or DVI
Output
SFP2
Electrical output
HDMI or DVI
Output
GPI ALARM
Open Collector Alarms
Wired alarms
OC Output
Unused inputs should be terminated to avoid alarms triggered by noise.
nevion.com | 8
SDI-DVI-2-SFP
Rev. B
5.3 Cable adapter
5.3.1 HDMI type A
An HDMI type D to HDMI type A can be delivered with the module for interfacing for
interfacing to HDMI type A equipment.
5.3.2 DVI-D
An HDMI type D to DVI-D can be delivered with the module for interfacing to DVI-D
equipment.
nevion.com | 9
SDI-DVI-2-SFP
Rev. B
6 Module status
The status of the module can be monitored in three ways.
1. GYDA System Controller (optional).
2. GPI at the rear of the sub-rack.
3. LED’s at the front of the sub-rack.
Of these three, the GPI and the LED’s are mounted on the module itself, whereas the GYDA
System Controller is a separate module giving detailed information on the card status.
6.1 GPI ALARM – Module Status Outputs
These outputs can be used for wiring up alarms for third party control systems. The GPI
outputs are open collector outputs, sinking to ground when an alarm is triggered. The GPI
connector is shown in figures below.
Electrical Maximums for GPI outputs
Max current: 100mA
Max voltage: 30V
6.1.1 GPI connections
SDI-DVI-2 module GPI pinning:
Signal
Name
Pin # Mode
Status
General error status for the module. Pin 1 Open Collector
LOS1
Loss of signal or missing SFP on Pin 2 Open Collector
channel 1.
LOS2
Loss of signal or missing SFP on Pin 3 Open Collector
channel 2.
Ground
0V / gnd pin.
Pin 8 0V.
Figure 1GPI connector
nevion.com | 10
SDI-DVI-2-SFP
Rev. B
6.2 Front panel – Status monitoring
The status of the module can be easily monitored visually by the LED’s at the front of the
module. The LEDs are visible through the front panel as shown in the figure below.
The SDI-DVI-2 has 4 LED’s each showing a status corresponding to the GPI pinning.
Diode \ State Red LED
Status
Yellow LED
Module is faulty, or N/A
module is initializing.
Green LED
No light
Module is OK
Module
has no
power
Module power
is OK
LOS/LOCK1 No input signal on
optical input 1.
Channel 1 is not
in lock or
unsupported
format.
Channel 1 is in Missing
lock and
SFP on
supported
signal 1
format.
LOS/LOCK2 No input signal on
optical input 2.
Channel 2 is not
in lock or
unsupported
format.
Channel 1 is in Missing
lock and
SFP on
supported
signal 1
format.
Receiver
SFP
NA
Present SFP
Missing SFP
NA
Table 1: LED states and what they mean
nevion.com | 11
SDI-DVI-2-SFP
Rev. B
General environmental requirements for Nevion equipment
1.
2.
-
The equipment will meet the guaranteed performance specification under the
following environmental conditions:
Operating room temperature
0°C to 45°C
range:
Operating relative humidity range:
<90% (non-condensing)
The equipment will operate without damage under the following environmental
conditions:
Temperature range:
-10°C to 55°C
Relative humidity range:
<95% (non-condensing)
nevion.com | 12
SDI-DVI-2-SFP
Rev. B
Product Warranty
The warranty terms and conditions for the product(s) covered by this manual follow the
General Sales Conditions by Nevion, which are available on the company web site:
www.nevion.com
nevion.com | 13
SDI-DVI-2-SFP
Rev. B
Appendix A Materials declaration and recycling
information
A.1 Materials declaration
For product sold into China after 1st March 2007, we comply with the “Administrative Measure
on the Control of Pollution by Electronic Information Products”. In the first stage of this
legislation, content of six hazardous materials has to be declared. The table below shows
the required information.
Toxic or hazardous substances and elements
組成名稱
Part Name
鉛
汞
镉
六价铬
多溴联苯
Lead Mercury Cadmium Hexavalent Polybrominated
(Pb)
(Hg)
(Cd)
Chromium
biphenyls
(Cr(VI))
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
<Product>
O
O
O
O
O
O
<Power supply, if
delivered with unit>
O
O
O
O
O
O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used
for this part is above the limit requirement in SJ/T11363-2006.
This is indicated by the product marking:
A.2 Recycling information
Nevion provides assistance to customers and recyclers through our web site
http://www.nevion.com/. Please contact Nevion’s Customer Support for assistance with
recycling if this site does not show the information you require.
Where it is not possible to return the product to Nevion or its agents for recycling, the following
general information may be of assistance:




Before attempting disassembly, ensure the product is completely disconnected from
power and signal connections.
All major parts are marked or labeled to show their material content.
Depending on the date of manufacture, this product may contain lead in solder.
Some circuit boards may contain battery-backed memory devices.
nevion.com | 14