Download Washing Machine

installing your washer
IMPORTANT NOTE TO INSTALLER
Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional for installation of this washer.
STEP 1
Removing the Shipping Bolts
Before using your washer, you must remove the four
shipping bolts from the back of the unit.
1. Loosen all the bolts with the supplied wrench.
2. Slide the bolt and spacer up and remove the bolt with
the spacer through the hole in the rear wall of your
washer. Repeat for each bolt.
3. Fill the holes with the supplied bolt hole covers (page 7).
4. Keep the shipping bolts and spacers for future use.
STEP 2
Selecting a Location
Before you install your washer, make sure the location:
•
Has a hard level surface.
•
Is away from direct sunlight.
•
Has adequate ventilation.
•
Will not freeze (below 32°F or 0°C).
•
Is away from heat sources such as oil or gas.
•
Has enough slack for the power cord.
•
Doesn’t have any carpeting that will obstruct ventilation openings.
10_ Installing your washer
BEST-WF419AAW-02657A_EN.indd 10
2009-02-18 ¿ÀÈÄ 3:26:43