1
Download Chapter Review Questions
Transcript
[edit protocols gvrp] lab@Vodkila# set interface ge-0/0/0 [edit protocols gvrp] lab@Vodkila# commit fpc0: . . . After the commit, you confirm that GRVP is running with a few show gvrp commands: [edit protocols gvrp] lab@Vodkila# run show gvrp Global GVRP configuration GVRP status : Enabled GVRP Timers (ms) Join : 200 Leave : 600 LeaveAll : 10000 Interface Name Protocol Status ---------------------------ge-0/0/0.0 Enabled [edit protocols gvrp] lab@Vodkila# run show gvrp statistics GVRP statistics Join Empty received : 0 Join In received : 0 Empty received : 0 Leave In received : 0 Leave Empty received : 0 LeaveAll received : 0 Join Empty transmitted : 36 Join In transmitted : 72 Empty transmitted : 0 Leave In transmitted : 0 Leave Empty transmitted : 0 LeaveAll transmitted : 16 The display confirms that GVRP is running on the ge-0/0/0 interface. However, statistics indicate that only transmit activity is occurring on the trunk. Adding GVRP to Rum should remedy this: [edit] lab@Rum# set protocols gvrp interface all [edit] lab@Rum# commit . . . After the change, the statistics at Rum confirm that GVRP messages are now being exchanged in both directions on the trunk: [edit] lab@Rum# run show gvrp statistics GVRP statistics Join Empty received : 4 EX to Catalyst VLAN Integration | 303
