Download editions - Digivod

5.11
Settings
Selecting the menu option
will open system settings
administration, enabling you to centrally define important settings for
your digivod® installation within separate tabs.
5.11.1 General settings
NTP Server
IP address of the NTP server (Network Time Protocol) that
shall be set into the cameras when using the automatic
camera discovery (see New camera (automatic)). By default
this will be the IP address of your digivod® server. This
ensures time synchronisation between your cameras and the
server, using Windows NTP Service.
Note: Please follow the instructions given in chapter NTP
configuration.
Master password
Password for administrator access to your cameras
Note: The master password should be entered and saved
before the automatic camera discovery can be used (see
New camera (automatic)).
Important: If a camera is in factory mode and uses the
manufacturers default password camera discovery will set
the master password on the camera.
171