1
Download Shure DFR22 Software User Guide (English)
Transcript
Ducker Release This controls the amount of time it takes the processor to return the ducked signals to their previous level once the hold time has passed. You can change this value by clicking on the spin buttons or by typing in a specific value. The range of available values is from 1 ms to 10,000 ms. Default Click this button to reset the processor to its system default settings. Bypass Bypass active Bypass inactive Click to pass signal through without altering it. When bypass is active, the button appears lighted in red. The default setting is inactive. Paging Channels Check the box next to each output to which you want to route the paging signal. This is the same as using the signal diagram or matrix mixer to route the signal from this input to the outputs. Any other signal routed to the selected output mix point(s) will be attenuated by the paging signal. Link Indicator This displays the link status of the processor. Any setting you change in a linked processor will change for all other processors in the same link group. For a complete explanation of linking and link groups, see the Linking section on page 24. Processor Linked Processor Not Linked © 2003 Shure Incorporated DFR22 Software Guide 75
