Download Manual

OPERATION FEATURES
8
9
10
11
12
13
14
Clutch handle
Forward - Reverse
PTO
Release for height adjustment.
Throttle control
Dead man s handle
Lock for clutch handle
WINTER STORAGE
-
If the machine is not to be used for a longer period of time the following prescription shall
be followed.
Clean all external parts on the machine. Any damages should be repaired before
storage.
All moving parts shall be lubricated with oil with good penetrating abilities in order to
avoid corrosion.
Empty the carburettor and fuel system of fuel by letting the engine run dry.
-
Dismount the sparking plug and pour 50 ml of oil into the opening. Draw the starting cord
until you feel resistance. Thereby you avoid corrosion in the cylinder.
Change oil on engine and transmission.
-
Cover the machine and place it in a dry and clean room.
-
TILLER
The rotary tiller is used to prepare the ground for the seeding work. The tiller is equipped
with an earth auger which determines the working depth.
The working depth can be adjusted by lifting/lowering the knives in comparison the tiller box.
On the top of the tiller box, where the tiller knives hang, it is possible to change the depth by
moving the bolt that fastens the knives. You see three holes in the top and three holes below
where it is possible to adjust the height of the knives in comparison to the tiller box.
Max cultivating depth is app. 20 cm. .
Pro Trac 55O R can be mounted with a side adjustable broom of 80 cm. It can also be used
with a rotary mower and a cutter bar.
TRANSPORT WHEEL
The rotary tiller can be mounted with a transport wheel, which is a good thing, when the
machine is to be transported longer distances.