Download User Manual - Hi-Tech Trading (USA) Inc.
Transcript
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION OF THIS PRODUCT. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your device in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your device when on board an aircraft. Any use of a device must be in accordance with applicable regulations per airline crew instructions. 1 Medical Devices Hearing Aids Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. FCC Notice to Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 2 TABLE OF CONTENT ABOUT BLUETOOTH HEADSET ................................…......................................…......4 ABOUT BLUETOOTH TECHNOLOGY ....................................................................…...4 PACKING LIST ..............................................................….........................…....……….. 4 BUTTONS INTRODUCTION …………………………………………………………………..5 CHARGING HEADSET ...........................................….........................…………..…....… 6 CHARGING TIME ........................................................…................………..………….… 6 TALK AND STANDBY TIMES ...................................................……...........................… 6 LOW BATTERY ............................................................................………............…….… 7 TURNING HEADSET ON/OFF ........................................................…………......….….…8 PAIRING HEADSET .........................................................……………....................…......7 USING HEADSET ............................................................................……………......…....9 ANSWERING A CALL ..........................................................…....…….......................…..9 ENDING A CALL ................................................................……....…...........................….9 VOICE DIALING FROM HEADSET .........................……….....…..............................…..10 LAST NUMBER REDIAL FROM HEADSET …………..............….............................…..10 ADJUSTING HEADSET VOLUME ............................................…........…................…...10 CARE AND MAINTENANCE ..............…….................................…........…...............…...10 SAFETY INFORMATION ..............……........................................…........…................….11 TROUBLESHOOTING ........………...............................................….......…....................12 PRODUCT SPECIFICATIONS …...................................................…..............................13 WARRANTY …………………………………………………………………………………….14 3 ABOUT BLUETOOTH HEADSET Providing simple wireless connection to your Bluetooth-enabled mobile phone, Bluetooth Headset offers you the freedom of making and receiving calls while on the move or at the office. The Bluetooth Headset is compatible with mobile phones that support the Bluetooth Headset or Handsfree Profiles to Create audio connection via Bluetooth technology. ABOUT BLUETOOTH TECHNOLOGY Bluetooth wireless technology is set to revolutionize the personal connectivity. By providing freedom from wired connections-enabling links and connectivity between computers, mobile phones, portable handheld devices and other Bluetooth enable devices within 10 meters, utilizing global sound and digital data 2.4GHz ISM transmission. PACKING LIST Bluetooth Headset 1 Pc A/C Charger 1 Pc USB Cable 1 Pc User Manual 1 Pc 4 BUTTONS INTRODUCTION 1. 2. 3. 4. 5. 6. 7. 8. 5 Multi-function Button (MFB): Controls several Headset functions (including ON/OFF) Volume Control Buttons: Adjust Headset volume Ear-hook: Attaches Headset to ear Charging Port: Charge Headset using USB cable Lanyard Loop: Attach lanyard to wear Headset around your neck when not in use LED: Provides visual Headset status Boom: Contains microphone – Close for easy storage Microphone: Picks up your voice CHARGING HEADSET The Bluetooth Headset comes with a built-in rechargeable battery. Prior to using the Headset for the first time please fully charge the battery, which will take about 3-4 hours. Insert the big end of the USB cable in the USB port on the A/C Charger and connect the charger to an AC wall outlet. Insert the smaller end of the USB cable in the charging port of the Bluetooth Headset. Red LED light on the Headset indicates that the battery is getting charged. NOTE: The Headset can also be charged using computer’s USB port instead on an A/C charger (use the same USB cable used to charge with the A/C charger) IMPORTANT: Red LED light may not appear for a few minutes if the Headset was not been used for a long time and the battery is completely drained. CHARGING TIME The battery is fully charged within 3-4 hours. When the battery is fully charged, the Red LED will turn off. TALK AND STANDBY TIMES Fully charged battery offers 4-6 hours of continuous talk time. talk time depends on the environmental conditions. 6 Standby time can be 120-150 hours. Actual LOW BATTERY When the Headset is on and the battery becomes low, the LED flashes red and the Headset emits a beep every 1 minute, please recharge the battery as described above. TURNING HEADSET ON/OFF (see next section on Pairing Process before using the Headset) Turning the Headset ON: Press and hold the Main Function Button (MFB) – Big Silver Button, for 4 seconds or until you hear a short beep. The LED will flash BLUE every few seconds, indicating the headset is ON. Turning the Headset OFF: Press and hold the MFB for 4 seconds or until you hear a long beep. The LED will flash RED and then stop flashing, indicating the Headset is OFF. IMPORTANT: Prior to using the Headset for the first time, you must pair it with a Bluetooth-enabled mobile phone or other Bluetooth device. Turning on the Headset reactivates the paring so that the wireless connection between the Headset and already paired mobile phone or Bluetooth Device is resumed. 7 PAIRING HEADSET The following steps describe pairing process for a typical Bluetooth-enabled Mobile Phone. 1. Make sure the headset is off (no flashing lights) 2. Press and hold MFB button for about 10 seconds (until light flashes red and blue) NOTE: After first 4 to 5 seconds the light will only flash blue DO NOT release the button 3. Once light starts flashing red and blue release the button NOTE: Light will flash red & blue for 1 minute, during this time the headset is discoverable by your cellular phone 4. While headset light flashes red & blue, complete pairing process on your cellular phone (see your cellular phone’s user manual for pairing instructions) NOTE: In case the light starts flashing just blue and you were not able to complete pairing process, please turn off the headset and start again from step 2) 5. When prompted for a passkey enter 1234 NOTE: When pairing is completed, the Headset LED will flash blue, followed by a long beep and the headset light will start flashing blue every 4 seconds. and is ready for use. 8 Headset is now connected to the phone USING HEADSET Once pairing is completed, you may access the following functions (some of these functions are only accessible for phones that support Hands-free profile): ANSWERING A CALL When there is an incoming call, you will hear ringing through the Headset, press the MFB (big silver button) on the Headset to accept the call or answer the call via your Mobile Phone in the normal way. ENDING A CALL Press the MFB to end your call or end the call via your Mobile Phone in the normal way, VOICE DIALING FROM HEADSET If your Mobile Phone is equipped with a voice dialing function, simply press the MFB on your Headset and when you hear a beep, say the voice tag. IMPROTANT: Please make sure to record voice tag into the Mobile Phone first before using voice-dialing function. This function is only applicable to Mobile Phone with Bluetooth Hands-free profile. Functionality varies depending on the Mobile Phone models you have. Please refer to your Mobile Phone’s User Manual for additional information. 9 LAST NUMBER REDIAL FROM HEADSET Press the MFB on your Headset twice. ADJUSTING HEADSET VOLUME Press the volume key repeatedly until you reach the desired volume level (Volume + key is the key on the bottom side of the Headset when worn on the right ear). NOTE: You may have to adjust the volume on your Mobile Phone as well. IMPORTANT: Volume on Mobile Phone is adjusted while you are on a phone call on most mobile phones CARE AND MAINTENANCE 1. Consider turning your Headset off before placing it in your pocket or bag, if the MFB is accidentally depressed, your Mobile Phone may place an unintended call. 10 2. Do not expose the Headset to liquid, moisture or humidity, as it is not waterproof. 3. Do not use abrasive cleaning solvents to clean the Headset. 4. Do not expose the Headset to extremely high or low temperatures. 5. Do not dispose of the Headset in a fire, as it will result in explosion. 6. Do not expose your Headset to sharp objects as this may cause scratches and damage. 7. Do not stick anything inside the Headset, as it does not contain serviceable components. 8. If you do not use the Headset for long periods, be sure to store it in a dry place, free from extreme temperatures, humidity and dust. Built-in Battery 1. Don not attempt to replace the Headset battery, as it is built-in and is not changeable 2. Charge the battery in accordance with the instructions supplied with this User Manual 3. Only use the manufacturer supplied charger when charging the Headset. Charging 1. Only use the manufacturer supplied charger when charging the Headset. 2. Do not disassemble the charger as it may expose you to dangerous voltages or other risks, as incorrect reassembly can cause electric shock when the Headset is subsequently used. 3. Do not use the charger outdoors or in damp areas. 4. Only charge the Headset's built-in battery in accordance with the instructions of this User Manual. 5. Avoid charging the Headset in extremely high and low temperatures. SAFETY INFORMATION 1. Check local laws regarding use of a Mobile Phone and Headset while driving. If you use the Headset while driving, ensure your attention and focus remains on the road and you drive in a responsible and safe manner. 11 2. Never allow children to play with the Headset-small parts may be a choking hazard. 3. Observe all signs that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres. 4. Turn off your Headset prior to boarding an aircraft. Do not use your Headset in an aircraft. 5. Never mount or store your Headset over any air bag deployment area as serious injury may result when an air bag deploys. 6. Do not open or mutilate the built-in battery 7. Dispose off batteries according to local regulations. Do not dispose in household waste. TROUBLESHOOTING • If you are unable to connect your Headset and Mobile Phone please try the following: 1. Ensure the Headset is turned on and is properly charged. 2. Ensure the Headset is paired with your Mobile Phone. 3. Ensure your Mobile Phone's Bluetooth feature is activated. Please refer to your Mobile Phone user manual for specific instructions. 4. Ensure the Headset is within 10 meter range of your Mobile Phone(s) and there are no obstructions, such as walls or other electronic devices in between. • If the above steps do not solve your problem, please recharge the Headset and remove your Mobile Phone battery for a while. • 12 The Bluetooth Headset is compliant with and adopts the Bluetooth Specification 1.2; however, interoperability between the Headset and other Bluetooth-enabled products is not guaranteed because of possible products incompatibility. For more information on the compatibility between the device with other Bluetooth-enabled products, please check with Mobile Phone manufacturer PRODUCT SPECIFICATIONS Bluetooth Specifications: Version 1.2, Class 2, 10 meters Supported Bluetooth Profiles: Headset and Handsfree Range of Frequency: 2.402 to 2.480GHz Spectrum Nominal Charging Time: Within 3 hours Talk Time*: Up to 6 hours Standby time*: Up to 150 hours Dimensions: 83(L) X 32(W) X 18(H) mm Weight: 28 grams * Depends on external factors like temperature, etc. 13 LIMITED 1-YEAR WARRANTY Coverage: Hi-Tech Trading (USA), Inc. (“HiTT”) warrants this product (“product”) against defects in materials and workmanship under normal consumer use for 1 year from the date of purchase. HiTT, at its option, will at no charge repair, replace or refund the purchase price of this Product should it not conform to this warranty. This limited warranty is a consumer’s exclusive remedy, extends only to the first consumer purchaser, is not transferable and is valid only on Products purchased by consumers in the United States or Canada. Exclusions: Normal Wear and Tear: Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries: Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Miscellaneous: This warranty does NOT cover defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the Product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Product for commercial purposes or subjecting the Product to abnormal usage or conditions; (d) service, installation, alteration, or modification in any way by someone other than HiTT and, (e) other acts which are not the fault of HiTT. Obtaining Service: To obtain service or information, please send email to [email protected]. You will receive instructions on how to ship the Product, at your expense, to a HiTT Service Center. To obtain service, you MUST include a copy of your receipt. 14 ZOpid and the Stylized Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © 2007 Hi-Tech Trading (USA), Inc. The information contained in this User Manual is believed to be correct at the time of printing. HiTT reserves the right to change or modify any information or specifications without notice. The contents of this User Manual are provided “as is.” Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability, or contents of this guide. 15 16