Download Instruction Manual

English
DVR Rear Panel
2
3
4
5
5
6
7
9
8
Connecting the DVR
1
10
8-Channel DVR model shown
Name
Function
1
DC 12V IN
Where you connect the included DC 12V power adapter. Use only the supplied power
adapter with the DVR, and use the power adapter only with the DVR.
2
PTZ (RS485)
To connect the RS485 cables to control a PTZ (pan, tilt, zoom) device on the DVR.
3
AUDIO OUT
RCA port for audio output. Used to connect your speaker or headphone.
4
USB
For connecting a USB mouse or a USB storage device.
5
HDMI
The primary video output of the DVR. For the highest possible video output quality, we
suggest using this output.
6
eSATA2*
To connect an external hard drive which acts as a live recording drive in the same
manner as the installed HDD.
7
VGA
For connecting a television or PC monitor with a VGA input.
8
LAN
Where you can connect the DVR to a network, typically directly into the router or
network switch.
9
AUDIO IN
RCA port for audio input. Used to connect audio source such as the camera’s built-in
microphone.
VIDEO IN
These are your video inputs. The number of video inputs on your DVR varies depending
on the DVR model you have. Each accepts a standard composite video signal and
connects via a BNC connector. The channels are labelled by numbers in the same order
as they appear on your DVR’s interface.
10
* Availability of this port is dependent on the model of your DVR.
7