Download Insert Introduction Here

How to Take Pre-Test Measurements
Introduction
How to Take
Pre-Test
Measurements
Once your material has been punched you are able to take your pre-test
gauge measurements. Follow the steps below to do so.
Step
1
Action
Illustration
Click the Caliper tool icon in
the tool box to display your
instrument.
NOTE: The icon will turn dark
gray when the mouse comes
into contact.
2
Drag the caliper tool with
your mouse and click the
center of your material to
lock in place.
3
Measure the gauge length by
dragging the caliper’s red jaw
spot.
NOTE: A constantly adjusting
measurement window will appear.
4
When you reach the correct
measurement your caliper
will turn blue.
5
Click the center of your material to begin measuring your gauge width.
6
Repeat steps 2 - 5
7
Click the caliper tool icon in the tool box to put away the instrument.
61 | P a g e