Download User Manual
Transcript
LKB-JR Light Kit Bag Jumbo Roller INSTRUCTIONS Introduction Thank you for choosing Impact. The Impact LKB-JR Jumbo Roller Light Kit Bag is a sturdy, durable, and weather-proof light kit bag. It’s ideal for transporting Impact’s Octacool 6 or Octacool 9 fluorescent light fixtures as well as many 16-inch reflector-style lights between locations and studio. The Jumbo Roller is thoughtfully designed with features to help keep your softboxes and other accessories organized and secure. Protection of your lighting gear starts with the weather-resistant outer shell made of 600 denier nylon. Inside the bag, the heavy-duty plastic wall construction is lined with a thick layer of high-density foam. An extra layer of one-inch thick foam covers the bottom panel of the compartment to offer superb protection of the reflectors so that the CFL lamps do not need to be removed prior to transport. Two removable stabilizer panels securely hold the two reflector-style lights in place with touch-connect fasteners on all four sides. On the inside of the lid, two zippered mesh pockets are designed to hold the softboxes, diffusers, and rods of the Octacool 6 or Octacool 9, and the third pocket is large enough to hold cables, power cords, handles, and other miscellaneous grip equipment. 2 For security during transit, the dual zippers placed together accept a user-supplied lock. The durable rubber contoured side grip handle and heavy-duty casters make moving a large quantity of equipment easy, and the two rubber feet provide balance and stability when standing the LKB-JR on its end. Transport options include dual handles with a touch-connect enclosure and a removable padded shoulder strap. Precautions ⚠ • • • • • Please read and follow these instructions, and keep this manual in a safe place. Make sure the item is intact and that there are no missing parts. Exercise caution when using this product with heavy or bulky equipment. This unit is not recommended for air travel. Do not check this unit as luggage. All photos are for illustrative purposes only. Box Contents • • • • • Light kit bag jumbo roller Padded shoulder strap (1) Removable divider (1) Stabilizer panels (2) User manual 3 Instructions Your LKB-JR comes fully assembled. To secure your equipment in the bag before transport, do the following: 1. Open the lid and remove the two stabilizer panels. 2. Place the Octacool or other reflector-style light reflector side down into the compartment on either side of the padded divider. Note: the bulbs do not need to be removed. 4 3. Align the light units so that the stand adapters are facing toward the side with the wheels and casters. 4. Unscrew and remove the handles from the back of the fixtures. The handles can be stored in the mesh pocket. 5. Fit the stabilizer panels over the backs of the reflector lights, orienting the tapered end of the keyhole cutout shape with the light stand adapters. Then attach the touch-connect strips to the sides of the compartment. Test your gear to make sure it is securely seated in the compartment. 6. Use the two long mesh storage compartments to hold the softbox, diffusers, and rods of the Octacool 6 or Octacool 9. 7. Use the third zippered mesh compartment for other accessories like cables, power cords, handles, or other grip gear. 5 Transporting 6 1. Zip shut the top of the bag with the dual zippers. When the zippers are lined up, a user-supplied lock can be placed through the interconnecting loops. 2. Use the side handle to roll the Jumbo Roller on its casters. You can also choose to carry your gear with the overlapping handles, or the included shoulder strap can be attached for an over-the-shoulder carrying option. Specifications LKB-JR Material Weather-resistant, heavy-duty 600 denier nylon shell – black matte finish Type of Closure Dual zipper that accepts user-supplied lock Transport options • Shoulder strap (adjustable, removable) • Overlapping 2˝ handles with touch-connect enclosure • Rubber grip side handle for use with casters Exterior Dimensions (H × W × D) 35˝ × 18˝ × 16˝ (89 × 46 × 41 cm) Height with wheels: 37.5˝ (95 cm) Interior dimensions (H × W × D) 33.5˝ × 16.5˝ × 13.5˝ (85 × 42 × 34 cm) Weight 17.5 lb. (7.9 kg) One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function. This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com IMPACT is a registered trademark of the Gradus Group. © 2015 Gradus Group LLC. All Rights Reserved. 7 GG1