Download User Manual - Gerald Simonds

CHAPTER 10: WHEEL LOCKS
6. Reattach the locking mechanism (handle and blade) portion of the
scissor lock to the base by inserting the hex bolt through the black
plastic washer (instead of the metal washer and spring), the base,
and the two washers and nut removed in Step 2.
7. Loosely secure the nut.
8. Reattach the handle to the base by inserting the Allen Screw removed
in Step 1 through the top washer, the handle sleeve, the handle, the
two middle washers, the base and the bottom nut. See Figure 80.
9. Securely tighten the Allen Screw.
10. Tighten the nut that was loosely secured in Step 7. Do not overtighten or the scissor lock will become difficult to operate.
11. Reinstall the scissor lock on the wheelchair and make sure it is
properly positioned to fully lock the rear wheel and prevent it from
turning when the lock is engaged. See “Adjusting/Replacing the
Composite Scissor Lock” on page 56.
OM_FOLDING_0907RevB
57
Folding Owners Manual