Download english

PRESENTATION
(6)Slot for communication option: It is for RS-485 card,
communication interface option.
(7)Control panel: This device shows and logs all the
useful information about the inverter operating, like the
status and warning messages. Furthermore, as it is
joined with a 1,8m. cable, it can be removed from its
slot and be located wherever. In case were needed to
extend its length, use a RS-232 (DB9) communication
cable up to 15 metres.
3.4.1.1. Graphic data logger (Control
panel)
• Green: Start and normal operating.
• Red: Grid or system fault (see “table of error messages”). Inverter is disconnected from grid and backlight
of LCD panel changes to red during its disconnection.
• Yellow: After disconnecting, the inverter recover its
status of normal operating. LCD panel changes to
yellow for 48 hours.
Data download: It is possible to download and access to
data logger for managing the internal data through a PC
via USB cable. For more information, see “Download of internal data to data logger” chapter.
CONNECTION.
Control panel
Control panel can be left assembled in the inverter or removed, to be hanged on the wall, connected through the
cable quoted previously.
APPEREANCE.
• LCD: 128 x 64 mm., monochrome.
• Keypad: “↑” , “↓” , “→” , “←” and “OK” in the centre.
LCD panel
Keypad
• Backlight: 3 colours.
3.4.1.2. Quality performances.
Fig. 3.
• Lead free, in accordance with RoHS (Restriction of
dangerous substances).
View of remote control panel
SETTING.
• High conversion efficiency 97%.
Next table shows the main features of control panel.
• 3 trackers of MPP (Maximum Power Point).
LCD
Monochrome
• Protection degree IP65.
• Graphic display 128x64 mm.
Information to display
Input power, output power,
operating mode and warning
message.
• 3 phases, 4 cables, 400V.
Storage duration
3 months
• High reliability.
Storage means
SD card
• User friendly operating.
Data download
USB cable type A to mini-B
• Maintenance free.
• Compact design.
• Powerful communication interface.
• Integrated ENS, in accordance with VDE 0126-1-1.
FEATURES.
Removable control panel: Data logger can be easily removed and located back again into the main unit. This way,
it can be hanged in the wall separate from the inverter.
• Earth fault detector of 30 mA. already integrated.
Colour backlight: Backlight of LCD panel changes its
colour depending on the inverter status:
SALICRU
7