Download User`s Manual

WELL WRC500N / WRC5010N / WRC5010NU
Configuring Static IP connection
If you are a leased line user with a fixed IP address, enter in the
IP address, subnet mask, gateway address, and DNS (domain
name server) address(es) provided to you by your ISP.
If your ISP wants you to connect to the Internet using Static IP,
follow the instructions below.
1. From the left-hand Network Settings -> WAN Interface
menu. The following page is displayed:
2. From the WAN Access Type drop-down list, select Static IP
setting.
3. Enter WAN IP Address, WAN Subnet Mask, Default
Gateway and DNS which was given by Telecom or by your
Internet Service Provider (ISP).
4. Click Apply Changes.
143