Download Multiglide/Spilerglide

Use
Special features
Always check the product before use and after washing.
resources means less Multiglide.
Never use a defective product. If the product shows signs
of wear-and-tear, it must be scrapped.
There is a risk the client may slide down. Never
leave the client alone on the edge of the bed.
Read these instructions carefully.
Never leave Multiglide on the floor after use.
It is important that carers receive instruction in manual
handling.
Etac offers advice and training for carers.
For further information, contact Etac.
To ensure that the client feels safe and that every manual
handling is smooth, always plan the manual handling in
advance.
If in any doubt, please contact Etac.
Always use the correct manual handling techniques
Remember to use the client's resources.
MultiGlide can be used either over or under a draw sheet,
making the draw sheet easier to pull on.
The choice of model depends not only on the needs but
also on the client's resources. As a general rule: more
Materials
Multiglide is made in 100% nylon.
Models where both inner and outer surfaces are
smooth.
Low friction on both inner and outer surfaces.
There are two models:
A model where the top side is coated with polyurethane
to prevent liquid penetration.
Outer surface: high friction. Inner surface: low friction.
Cleaning
The product should be checked regularly, preferably each
time it is used, and especially after wash.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself. Never use
a defective product.
Washing instructions:
Do not use fabric softener – as this will reduce the glide
effect.
7
6