Download Undersökning och utveckling av multi

2
15.
Original
16.
Original
17.
18.
Original
Original
19.
Original
Support for TX OOB spurious emission
measurements
Support for RX OOB spurious emission
measurements
Support for other measurements
Switches for switching between
filters/amplifiers
Support for switching to a signal path with
high attenuation.
Base
Wanted
Extra
Base
Base
Software requirements
The application will be written in Agilent VEE. The application will need to be able to select what
filters that are going to be used for the measurement. The ability to switch between different
amplifiers in the application is also required. The addition of preset configurations for different
band is desired, to simplify usage of the application. A graphical representation of the current
configuration would further increase user friendliness. A descriptive user manual is important so the
user can understand how the application works.
21.
Original
22.
Original
23.
24.
25.
26.
27.
28.
29.
Original
Original
Original
Original
Original
Original
Original
Adjustable frequency range (by switching
and/or tuning filter)
Adjustable amplification (by switching
amplifier)
Preset for bands: B1, B3, B4, B7 and B8
Preset for Band B12 and B13
Preset for other bands
Easy to use interface
Graphical representation of settings
User Manual
Application written in Agilent VEE
Base
Base
Wanted
Extra
Extra
Base
Wanted
Wanted
Base