Download WeldWatch System User Manual

Create and Use an Enhanced Region
WeldWatch software includes an option of defining a small section of the video display with
different picture settings. This is called an enhanced region. It is most useful over the arc and
surrounding area, but you can place it anywhere within the image. It can be circular or square,
and can optionally follow the arc's location in the image.
There are two locations important to the enhanced region: the part of the image it comes from
(the "Source Area") and the place in the image where it is shown (the "Destination").
The enhanced region is set up using the Region panel under Settings. The picture settings of the
enhanced region can be set on the Picture panel .
An example of an enhanced region directly overlaid onto the video is here:
The enhanced region can also be moved off to the corner, so the user can move back and forth
between the regular and enhanced displays as needed. This is similar to a "Picture in Picture"
effect.
15