Download Installation Manual - Utilecon Services, LLC

Powermonitor 3000
Product Approvals
57
EtherNet/IP Conformance Testing
All Series B Powermonitor products equipped with an EtherNet/IP
communications port bear the mark shown below. This mark
indicates the Powermonitor 3000 has been tested at an Open Device
Vendor Association (ODVA) independent test lab and has passed the
EtherNet/IP conformance test. This test provides a level of assurance
that the Powermonitor 3000 will interoperate with other conformance
tested EtherNet/IP devices (including devices from other vendors).
Two representative devices from the Powermonitor 3000 EtherNet/IP
family of devices; the 1404-M405A-ENT B and the 1404-M8805A-ENT
B have been tested by ODVA using EtherNet/IP Conformance Test
version A2.8. The ODVA website (www.odva.org) maintains a list of
products that have passed the conformance test at one of their test
labs.
ControlNet Conformance Testing
All Powermonitor products equipped with a ControlNet
communications port bear the mark shown below. This mark
indicates the Powermonitor 3000 has been tested at a ControlNet
International (CI) independent test lab and has passed the ControlNet
conformance test. This test provides a level of assurance that the
Powermonitor 3000 will interoperate with other conformance tested
ControlNet devices (including devices from other vendors). Two
representative device from the Powermonitor 3000 ControlNet family
of devices; the 1404-M405A-CNT A and the 1404-M805A-CNT A have
been tested by CI using ControlNet Conformance Test version 12. The
CI website (www.ControlNet.org) maintains a list of products that
have passed the conformance test at one of their test labs.
UL/CUL
UL 508 listed, File E96956, for Industrial Control Equipment and CUL
Certified.
Publication 1404-IN007D-EN-P - October 2004