Download Instruction Manual

F:\CX75000_Paper_Revision3\GB\4183856141\4183856141NEX5U2\01GBNEX5U2\030PRE.fm
master: Right
Notes
• When changing the lens, if dust or debris gets inside the camera and adheres to the
surface of the image sensor (the part that acts as the film), it may appear on the
image, depending on the shooting environment. The camera vibrates slightly when
it is turned off, due to the anti-dust function, to prevent dust from adhering to the
image sensor. However, attach or remove the lens quickly somewhere away from
dusty locations.
• Do not leave the camera with the lens removed.
• When you want to use body caps or lens rear caps, please purchase ALC-B1EM
(body cap) or ALC-R1EM (lens rear cap) (sold separately).
Preparing the camera
Inserting a memory card (sold separately)
1
Open the cover.
2
Insert a memory card.
NEX-5
• Insert the memory card until it
clicks as illustrated.
Check on the direction of the
notched corner.
NEX-3
Check on the direction of the
notched corner.
NEX-3/NEX-5
4-183-856-14(1)
GB
21