Download Carlson Roads 2006

• Lightweight polylines and hatch patterns are converted to R12 polylines and hatch patterns.
• All solids, bodies, regions, ellipses, leaders, multilines, rays, tolerances, and xlines are converted to lines,
arcs, and circles as appropriate.
• Groups, complex linetypes, OLE objects, and preview images are not displayed.
• Many objects are lost if you save a drawing as Release 12 and open it later in AutoCAD 2000 or later.
Pulldown Menu Location: File
Keyboard Command: SAVEAS
Prerequisite: None
Page Setup
Function
This command allows you to configure your drawing for plotting. The Page Setup dialog box has the same options
as the Plot dialog box. See the PLOT command below for a detailed description of options.
Pulldown Menu Location: File
Keyboard Command: PAGESETUP
Prerequisite: None
Plot Preview
Function
This option displays the drawing as it will appear when plotted on paper. To exit the print preview, right-click and
choose Exit. This command is the same as the Full Preview option under Plot.
Pulldown Menu Location: File
Keyboard Command: PREVIEW
Prerequisite: An assigned plotter
Plot
Function
This command allows you to plot a drawing to a plotting device or file.
Carlson Roads displays the Plot dialog box. Choose OK to begin plotting with the current settings and display the
Plot Progress dialog box.
1 The Plot dialog box includes the tabs, Plot Device and Plot Settings, and several options to customize the plot.
Page Setup
57