Download VIRGO Data Display Users`s Manual

Date : April 29, 2009
Page : 22
browsers and pushing one of those buttons creates as many plots (or audio or dump) as
there are channels selected. If you push ”2D”, ”TRFCT”, ”COHE”, or ”CORR” button,
the selected channels are taken 2 by 2, from upper to lower. If a channel is pending, it is
taken as Y variable, and the data display will take as X variable the channel you select
just after.
• Plots: this browser shows the list of plots created. You can select one or several
plots and edit or remove them.
• Save: this button allows to save the current plots according to the suffix you put in
the name (root, ps or jpg).
• Edit: this button allows to change the parameters of the plots selected.
• Edit Clone: this button do the same as ”Edit” but the parameters you changed
are cloned to all the plots of the same type as the one you edited. This is convenient
when you want to change for instance the time window size of all the time plots.
• Edit All: this button do the same as ”Edit” but the parameters you changed are
cloned to all the plots. This is convenient when you want to change for instance the
time window size or the resampling frequency of all the plots.
• Superpose: this button put together (in the same root pad) the plots selected.
• Unsuperpose: this button separate (put in different root pad) the plots selected.
• Copy: create new plots by doing a copy of the plots selected.
• Transform: transform the selected plots into another type of plots, with default
values and same channels.
• PermuteVar: this button exchange the variables of the 2D, TRFCT or COHE
plots selected.
• Move Up: move up in the list all the plots selected.
• Move Down: move down in the list all the plots selected.
• Hide: this button puts in ”hide state” all the plots selected. This means that they
are still available but will not be displayed.
• Show: this button puts in ”show state” all the plots selected. This means that they
will be displayed.
• Remove: remove from the list all the plots selected.
• Clear: remove all the plots from the list.