Download LANTIRN

OG-LANTIRN
24/6/2002
Now you be able to see the FLIR image gathered from the Pod superimposed
over the HUD and the FLIR page on the MFD will now display some options,
which will allow you to bring into line the Pods FOV with that of yours as
seen through the HUD.
The Dec Fov OSB 20 & Exp Fov
OSB 6 commands will allow you to
expand (magnify) or decrease the
image displayed. The Dec Pitch OSB
19 & Inc Pitch OSB 7 will move the
FOV either up or down in the HUD,
these are of most use when alignment
is necessary. The corresponding
values for these adjustments are also
displayed on this page. Using this
function you can reposition the FOV
of the Pod to view below and to the
front of the aircraft see figure 3. This
can be useful; allowing you to scan
for hot targets whilst maintaining level flight, even at high altitude, as the
image can be expanded considerably. Using the keystrokes for theses OSB
commands you could program a rotary on the HOTAS to pitch up and down,
or to “snapshot” from forward view to a view 30° nose down and back again.
8
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com