Download Instruction Manual

Transcript
ENGLISH
ANGLE GRINDER
D28410/D28411/D28413/D28414/D28420/
D28421/D28422/D28423/D28432C/D28750
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
DEWALT one of the most reliable partners for professional power tool users.
Technical data
Voltage
(U.K. & Ireland only)
Power input
No-load speed
Wheel diameter
Spindle
Weight
V
V
W
min-1
mm
Voltage
(U.K. & Ireland only)
Power input
No-load speed
Wheel diameter
Spindle
Weight
V
V
W
min-1
mm
Fuses:
Europe
U.K. & Ireland
D28410
230
2,100
8,500
180
M14
kg 4.7
D28422
230
2,400
8,500
180
M14
kg 5.3
D28411
230
D28413
230
2,100
6,500
230
M14
4.7
2,200
8,500
180
M14
4.7
D28423
230
230/115
2,400
6,500
230
M14
5.3
D28432C
230
230/115
2,600
6,500
230
M14
5.3
D28414
230
230/115
2,200
6,500
230
M14
4.7
D28420
230
D28421
230
2,300
8,500
180
M14
5.3
2,300
6,500
230
M14
5.3
D28750
230
2,400
5,000
230
M14
5.3
EC-Declaration of conformity
230 V tools
230 V tools
10 Amperes, mains
13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in this
manual.
D28410/D28411/D28413/D28414/D28420/
D28421/D28422/D28423/D28432C/D28750
DEWALT declares that these power tools have been
designed in compliance with: 98/37/EC,
89/336/EEC, 2006/95/EC, EN 60745-1,
EN 50144-2-3, EN 55014-2, EN 55014-1,
EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Denotes risk of electric shock.
Fire hazard.
5