Download MightyGPS NV

Cancel: Send SMS sdlog+password+0 to the tracker to deactivate the function of
storing data in SD card.
9.14.2 Setup: Send SMS readsd+password+space+1 to ask the tracker to send data
in the SD card to the GPRS server.
Cancel: Send SMS readsd+password+space+0 to ask the tracker to stop sending
data in the SD card to the server.
10 Monitoring Mode(voice surveillance mode)
Send SMS monitor+password, the response from the tracker is “monitor ok” then
you can hear the voice around the tracker after your call。
11 GPRS setting
In order to use GPRS function, the user needs to set IP, Port and APN ( access point
name ) by either cell phone, or our PC software.
（NOTE: Some countries or regions should set APN’s User Name and APN’s
Password.）
11.1 Set an IP address and port:
Setup: Send SMS adminip+123456+space+IP address+space+port.
If setup successful, the tracker will reply SMS “adminip ok”
Cancel: Send SMS noadminip+123456
11.2 Set APN
Setup: Send SMS apn+123456+space+specify apn content.
If setup successful, the tracker will reply SMS “APN ok”.
Cancel: The old APN will be invalid automatically when a new APN is set.
11.3 Set APN’s User Name