Download Instruction Manual

[email protected]
Tolerance:
+/- 1.0 my or +/- 0.06 mils
Smallest measurable area:
10 x 10 mm2 (0.4“ x 0.4“)
Minimum curvature:
convex:
5 mm or 0.02“
concave:
30 mm or 1“
Minimum substrate:
thickness:
Fe: 0.20 mm or 8 mils
NFe: 0.05 mm or 2 mils
Temperature range:
Storage:
-10°C - +60°C
(14°F – 140°F)
Operation:
0°C - +60°C
(32°F – 140°F)
Probes:
Single point
Power supply:
9 Volt E block alkaline
Dimensions: (LxBxH) 118x58x38 mm
Weight:
Approx. 150 g with the battery
Technical data subject to change without notification
In this direction will find a vision of the measurement technique:
http://www.industrial-needs.com/measuring-instruments.htm
NOTE: "This instrument doesn’t have ATEX protection, so it should not be used in potentially explosive
atmospheres (powder, flammable gases)."
8