Download User Manual - Wisely Laser Marking/Engraving/Cutting Machines

Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
MY-M20F-III
Raycus Fiber Laser Marking Machine
User Manual
1 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
Content
Chapter 1
Preface…………………………….…………………….……………………………………………-3-
1.1 Thanks………….…………………………………………………………………………………………-31.2 Company Introduce………………………………………………………………………………………-31.3 Packaging Check……………….…………………………………………………………………………-3Chapter 2
Safety Instruction and Principle……………………………………………………………………-4-
2.1 Safety Classification (laser /electricity) ………………………………………………….………………-52.2 Safety Precautions…………………………………………………………………….….………………-5Chapter 3
System Description, Theory and Applications……………………………………………………-6-
3.1 Brief Introduction for Fiber Laser Marking Machine……………………………………………………-63.2 Typical Application Range……………………………………………………………..…………………-63.3 Features…………………………………………………………………………………...………………-63.4 Technical Parameters of the Fiber Laser Marking Machine……………………………………………...-7Chapter 4
Machine Installation and operation……………………………………..………………………….-7-
4.1 Unpacking…………………………………………………………………………..………………….…-84.2 Space and Environment…………………………………………………………….…………………..…-84.3 Air-cooled System………………………………………………………………….……………………..-84.4 Step of Basic Operation…………………………………………………………………………………...-84.4.1 Turn ON…………………………………………………………………..………………………-84.2.2 Turn OFF………...……………………………………………………………………..………...-8Chapter 5
Installations…………………………………………………………………...……………………-8-
5.1 Software Installation…………………………………………………………………………………...…-85.2 Control Card Driver Installation………………………………………………………………………….-95.3 Dog Driver Installation……………………………………………………………………………….…-13Chapter 6
Parameter Settings………………………………….…………………………………………….-15-
6.1 Field……………………………………………………….…………………………………………..…-156.2 Laser Control………..……………………………………….………………………..…………………-166.3 Port…………………….…………………………………….………………………..…………………-176.4 Other……………………………………………………….………………………..…………………-17Chapter 7
Error……………………………………….………………………..………………………………-18-
7.1 Work in the Demo Version………………………………………………………………………………-187.2 Tips Software Already Running…………………………………………………………………………-18Chapter 8
Daily Maintenance………………………………….………………………………………………-18-
Chapter 9
Service…………......….......………….…........................……………………………………...……-202 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
Chapter 1
Preface
1.1 Thanks
Many thanks for purchasing our laser marking machine, our aim is to offer high-quality, easy-operation
laser marking solution to each customer. Before using the machine, we kindly advise you to read the user
manual carefully.
This manual introduces the methods of operation and maintenance of laser marking.
1.2 Company introduce
Wisely Laser manufactures a comprehensive range of laser cutting and marking systems powered by
world-leading laser brands such as IPG/SPI for fiber lasers, Synrad and Coherent CO2 marking machines,
and GSI and RECI CO2 engraving and cutting systems.
We bring you new concepts of industrial laser systems – proudly designed and built right here in China.
Our Mission – to be recognized as China’s foremost laser engraving, cutting, marking and etching
solution provider.
Our commitment – we will build long-term mutually beneficial and healthy business partnerships.
Our Guarantee – we will deliver precisely what our customer expects to receive as defined in the sales
contract, and our service and support response will deliver results within 24 hours, anywhere in the world.
1.3 Packaging checks
Every marking system has been checked strictly before delivery, only the qualified product can be
shipped. When you get the cargo, we advise you to check as follows:
1. Whether the package got some problems due to rude handling.
2. Whether you get all of cargoes as per packing list. Please report to shipper immediately once you find
anything which is not compatible with packing list.
3. Whether the machine can work properly once you operate it. WISELY laser engineers will install the
laser marking machine well before shipment. In order to do the future maintenance, we hope users
should know the installation of laser marker.
3 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
Chapter 2
Safety instruction and principle
2.1 Safety Classification (laser /electricity)
Only Four-level safety engineers are allowed to operate and maintain laser machine.
Four-lever laser will produce dangerous and invisible radiation when open laser machine, the radiation
will be harmful to worker's eyes and skin. Radiation of Sub-shot and reflection is also harmful to people.
Warning: Spot
When the red radiation produces refraction to eyes, it will focus on the retina, eyes will be hurt easily. The
high-intensity radiation can burn the retina of local soft tissue, can lead to vision loss or blindness. In a
word, you should always wear protective glasses during the machine operation or maintenance.
Warning: Wear protective glass
Protective glass plays a protective role (for direct radiation, radiation reflected and scattered radiation).
However, even if you are wearing protective glasses and not look directly at the spot, intense laser
radiation still can damage the protection tool.
Before wearing the glass, please check whether it is damaged. To be sure you are wearing the right glass,
because the protective glass for CO2 laser can’t protect the laser radiation emitted from YAG laser
Warning: Fire
Although the four-level laser output power is not high, you might as well pay more attention to the fire
when the laser is working.
Warning: High voltage
Four-level laser adopts the dangerous high voltage, so the maintenance worker should have machine
trained knowledge
If you are engaged in the electricity and electronic components job, please do as follows
1) Confirm all the voltage sources are not separated
2) Adopt all the safety measures
3) Comply with safety rules
Laser is with high instantaneous voltage (>20kv), must be very careful when you use. If you test
electronic components on the four-level laser, you must eliminate all the leakage voltage ways. Because
the high-voltage capacitor will produce high energy and voltage, it will take you some minutes to reduce
high-energy by reducing electrical resistance when closing laser, you must be careful this time.
Only special trained technicians are allowed to work for electrical and electronic
components in the laser.
4 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
2.2 Safety precautions
Do not work alone
When the user does service or maintenance for machine, it is better to have a worker who is familiar with
risk and high-voltage laser radiation knowledge besides you. For example, once an accident occurs, this
person can help you turn off the laser equipment and provide relief.
Allow air circulation appropriately
Some materials in the laser processing will produce harmful smog (such plastic), so you might as well
install Exhaust system when the laser processes those materials.
Prevent the dissemination of harmful smog.
1. Laser must work in the better ventilation system environment.
2. Laser beam can make almost any materials melted and evaporated. If it is used improperly, the
different processing materials will emit different harmful smog to people.
3. If you want to do any maintenance such as repair and inspection work, make sure all of the power on
laser is turned off, and fixed on the main switch. Turn off the Main switch, take out of the key and
stick warning tag and mark on the laser, and never re-open before problems are solved.
4. When laser is re-checked, make sure all of screws are tightened
5. When the maintenance is finished, please check whether safety installation works well
Do not make any changes to laser marking system without written authorization
from WISELY laser management approval.
Noise
Laser system produces the noise under 70db.
Worker
Should be trained before operating the machine.
Control
Do not modify software or any other default settings in any ways.
The fiber laser must not be allowed to operate on the high-reflectance materials without optical isolator,
such as gold, silver, copper, other high reflective polished silicon other similar materials.
Because the laser will return to the fiber laser source by the laser path once the laser hits on the very
high-reflection material.
You can try to mark the high-reflection material unless the laser does not hit the material vertically.
To start laser system, you should meet the following conditions:
5 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
1) Application software must be used in specified methods
2) All of safety settings work well
3) Comply to all of safety rules
Safety devices
Check all safety devices if they work well.
Chapter 3
System description, theory and applications of fiber laser marker
3.1 Brief introduction for Fiber laser marking machine.
WISELY: The third-generation high-speed, permanent free-maintenance fiber laser marking is the most
advanced and fast-speed laser marking in the world
Wisely fiber laser marking adopts world's most advanced technology, it is the third-generation laser
marking system. It adopts fiber laser source to achieve marking function by ultra-high-speed scanning
system. The fiber laser marking conversion is efficient, it adopts air-cooling mode, and the laser beam
output is qualified, longer lifespan, and saving-energy. It can carve metal materials and some non-metallic
materials, is mainly used in the high-request fields for depth, smoothness, concentration, such as stainless
steel decorations for cell phone, watches, model, IC, cell phone buttons, etc. Photo marking can carve
beautiful pictures in the metal, plastic surface, and the marking speed is 3-12 times than the
first-generation pump laser and the second-generation semiconductor laser.
3.2 Typical application range
Application in integrated circuits, computer accessories, precision bearings, watches, electronics and
communications products, aerospace devices. All kinds of auto parts, house electrical appliances,
hardware tools, model, cable, food packaging, jewelry, tobacco, sanitary ware, etc.
3.3 Features
1) High Precision: upto 0.0012mm, bring you the fantastic and satisfied marking effect.
2) Superior Laser Beam: the definition is 1 micron, 10 times as that of traditional products.
3) No Consumables: One Fiber marker can work for more than 5 years without any consumables.
4) Fast Speed: Max. 7000mm/s, is 3 to 5 times above that of traditional products.
5) The laser beam comes out from the Raycus fiber laser source directly, no need to adjust the laser
optical path.
6) Low consumption: <450W, is 1/25 ~ 1/10 times as that of Diode and YAG, more economized and
environmental.
7) Original Beijing JCZ controller, USB interface, swift and stable transmission, easy software operation,
strong functions.
8) Original scanning galvanometer, with good seal, capable to prevent dust and water, small volume,
compact and solid.
9) Long lifespan of Raycus laser source: 100 000 hours (light pumping YAG: several hundred hours;
6 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
semi-conductor: 10 000 h).
10) Strong Compatibility: TTF Font, SHX, BMP, DXF, AI, PLT and other format files output from
CorelDraw, PhotoShop, AutoCAD, etc..
11) Integrated Air Cooling System: The cooling effect is more excellent than the water cooling effect in
YAG laser, no maintenance.
12) Deeper Marking: Max. 1.0mm stainless steel, very suitable for the industries which need high
precision and depth marking effect.
3.4 Technical Parameters of the Fibre Laser Marking Machine
Type
MY-M20F-III
Power
20W
Laser Wavelength
1064nm
Marking Area
150mm*150mm
Optional Marking Area
50mm*50mm / 100mm*100mm / 200mm*200mm / 300mm*300mm
Marking Depth
≤1mm
Marking Speed
7000mm/s
Minimum Line Width
0.015mm
Minimum Character
0.2mm
Repeated Precision
±0.003mm
Fiber Laser Source
Raycus from China
Scan Head
Galvo Tech or CenturySunny from China
Controller (Software--EzCad)
JCZ from China
Life-span of Fiber Laser Module
100 000-200 000 hours
M2 <1.6
Beam Quality
Focus Spot Diameter
<0.01mm
Output Power of Laser
10%~100% continuously to be adjusted
Output Frequency of Laser
20KHz~80KHz continuously to be adjusted
Power Stability (8h)
<±1.5%rms
System Operation Environment
Windows XP / Windows 7--32bits
Cooling Mode
Air cooling--Built-in
Temperature of Operation Environment
Voltage
15℃~35℃
220V / 50HZ / 1-PH or 110V / 60HZ / 1-PH
Power Requirement
<500W
Computer Requested
There will be one PC with the machine
Dimension (L*W*H)
550mm*600mm*600mm
Package Size
450mm*750mm*850mm
Net Weight
50KG
Gross Weight
70KG
Chapter 4
7 / 20
Copyright@2014
Machine Installation and operation
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
4.1 Unpacking
1) Make sure the goods packaging is as per the shipping Marks.
2) Take off the seal of packing box
3) Remove the packing material around the unit
4) Check shipping list carefully, report the shipper any unmatched project with contract
4.2 Space and environment
 The system should be installed at the place without dust, strong electrical magnetic field, oil and
smoke.
 It is forbidden to expose the machine in the acid steam or other caustic gas.
 To avoid vibrating and shocking, the floor should be flat and hard.
4.3 Air-cooling system
Fiber laser adopts air-cooling system, just keep the temperature between 15℃ and 35℃.
4.4 Step of basic operation
4.4.1 Turn ON
1. Start computer
2. Push the auto-lock power button in the equipment to start Raycus fiber laser source (Or turn on the
laser power by the key)
3. Run software EzCad, make or load a file which needs to mark
4. Prepare to mark.
4.2.2 Turn OFF
1. Save files
2. Quit the software and close computer
3. After two minutes, Push the auto-lock power button on the equipment to power off laser source (Or
you can turn off the laser power by the key)
4. Disconnect main power
Chapter 5
Installations
We have installed the software in the computer before delivery, the following installation information will
guide you to install the software once you change the computer.
5.1 Software Installation
1. Please copy the software from the CD Disk or download it from the website of manufacturer directly,
as shown in the figure
8 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
2. Send EzCad to desktop, as shown in the figure
3. You will see the corn at the desktop of your computer.
5.2 Control Card Driver Installation
1. Power on the machine, keep the control card be in “Ready Mode”.
9 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
2. Connect the computer with USB cable, then the computer will show “
”.
Usually, you need to install the driver manually at the first time (The driver can not be installed well
automatically).
3. Find “My Computer”, choose “Properties” and “Device Manager”, as shown in the figure
4. Choose “Other Devices” and you will see “USBLMCV2”, right-click to choose “Update Driver
Software USBLMCV2”, as shown in the figure
10 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
5. Choose the path of Driver, as shown in the figure
11 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
6. After finishing the driver installation, you will see “Laser Mark Control Board V2 [USB]” on “Device
Manager”, as shown in the figure
12 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
Now, the Control Card Driver is installed well.
5.3 Dongle Driver Installation
1. Find the software in D Disk, its name is JCZ2.70, and find the folder “Dog_Driver”, just open it.
13 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
2. Choose “DogInstall_EN” and install it.
Okay, you can run the software “EzCad”, as shown in the figure
14 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
Chapter 6 Parameter Settings
Before operating the machine, you need to do the parameter settings. The windows of parameter
settings will appear once you press “F3” on the computer keyboard or click the option “Param(F3)”
in the software.
6.1 Field—To adjust the working area, and the verticality and levelness of the line when you mark a 200*200mm square
box, as shown in the figure
15 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
6.2 Laser Control—You need to choose the right “Laser Type” and Fiber Serial, as shown in the figure
16 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
6.3 Port—You can choose “Start Marking” and “Input Port 14”, this is for your Foot Switch, as shown in the figure
6.4 Other—You can set the parameters for the Red Light Pointer, as shown in the figure
The above parameter settings are just for your reference, you need to set the right
parameters as per your machine. Under the ordinary circumstance, we will set the
parameters well before delivery.
17 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
Chapter 7
Error
7.1 Work in the Demo version
If it appears
, it means the software can not connect the control card, the reasons might be:
1) You did not power on the machine, the control card is not in ready mode
Solution: Just power on the machine.
2) USB connection between the control card and software
Solution: Just check your USB connection.
3) The Control Card got some problems
Solution: 1. Replace a new card; 2. Reboot your machine before you run the software.
4) The operator did not install the Control Card Driver or Dog Driver properly.
Solution: Check which driver you did not install, then just install it.
Solution: Uninstall the software and reinstall it after you connect the machine and computer. Before
reinstalling the software, we advise you to shut down the anti-virus software in advance.
7.2 Tips software already running
Tips information as shown in the figure
18 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
If you close the software, then open it immediately, it will be happened, because the operate system hasn't
enough time to release RAM
1) Click “OK”, open EzCad software after some minutes.
2) If the operation is invalid, please open “Task manager” (you can use Ctrl + Alt + Delete to open it),
kill the process named “EzCad2.7.0-Untitled”,
3) If the problem is still not solved, please restart computer
19 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved
Wisely Laser Machinery Limited
B6106-6108, Nanfangmingzhu Commercial City, Longhua New District, Shenzhen 518109 China
Tel: 0086-755 8996 1916 Fax: 0086-755 2857 0577 E-mail: [email protected]
wwlaser.com www.wwlaser.hk
www.wisely-laser.com
www.wisely.co.in
Chapter 9
Daily Maintenance
After a few times, you should do some daily maintenance as follows:
1) Electrical control system works well
2) Computer system works well
3) Marking software works well
4) Elevating platform does not loose, screw does not loose and drop
5) Air cooling system for fiber laser source works well
6) Do not squeeze fiber, be sure the protecting cover is good
7) Keep lens clean
8) Keep equipment clean
Chapter 10
Service
If you need any service, please check the below contact information:
Contact Person:
Jeff Wong
Mobile/Viber/WhatsApp/Line:
0086-150 1350 9330
Skype ID:
wwlaser
Email:
[email protected] / [email protected]
20 / 20
Copyright@2014
Wisely Laser Machinery Limited
All rights reserved