Download Manual - Sintech adapter

2E
Initialize Slot 14
Complete post-video RAM fails on data bits
ROM test processing. XXXX* of low byte of
If the
EGA/VGA memory bus
controller is not found,
perform the display
memory read/write test
next
2F
Initialize Slot 15
The
EGA/VGA Enable cache before
controller was not system BIOS shadow
found. The display
memory read/write test
is about to begin
30
Size of base Memory From The display memory
256K to 640K and Memory is read/write test passed.
Extended Above 1MB.
Look for retracing
checking next
Test Base Memory From 256K The display memory
to 640K and Memory Extended read/write
test
or
Above 1MB
retracing
checking
failed. Perform the
alternate
display
memory read/write test
next
31
32
33
34
35
36
37
38
39
If EISA Mode, Test EISA The alternate display Test CPU bus-clock
Memory Found in Slots memory read/write test frequency
Initialization
passed.
Look
for
alternate
display
retracing
checking
next.
Reserved
Initialize
Phoenix
Dispatch manager
Reserved
Video
display
checking is over. Set
the display mode next.
Reserved
Reserved
Warm start and shut
down
Reserved
The display mode is
set. Displaying the
information when it
boots next.
Reserved
Initialize the bus input, Shadow system BIOS
IPL
and
general ROM
devices next, if present
Reserved
Display
bus