Download Operating instructions Ørsted

User manual
5.3.2.11 Display of information and
warnings
The battery's remaining capacity is shown
in field [11] as standard. Depending on
the travelling situation, information and
warnings can also be indicated in the field
as shown below.
Display of the battery's
capacity (standard
representation)
The battery's remaining
capacity is shown step by step
with a decreasing white bar.
The battery's charging
process
1. The battery charger is
plugged in and the battery
is being charged (only for battery
models which are charged via a second
charging socket which is why the power
connection from the battery to the sMMI
does not have to be disconnected).
2. The battery is charged using energy from
the motor (recuperation, see also section
3.2.5).
Warning
The battery is flat. No power
can be taken from the battery,
motorised assistance of the
Pedelec is no longer available. Please
charge the battery as soon as possible
using the charger supplied.
Braking assistant active
While travelling downhill, your
Pedelec is automatically braked
within the preset limits (see section 3.2.6)
Service reminder
The service interval of your
Pedelec has expired. Please
arrange a service appointment
with your specialist dealer. The
display can be reset by your dealer using
diagnostic software.
Warning - Temperature problem
In case of extremely long and
steep inclines (especially in
BOOST mode), the drive
generates heat leading to an
automatic reduction in performance inside
the motor from a temperature of +80°C.
This is shown on the display by the
temperature warning signal. Thanks to the
intelligent multipoint thermal management
monitoring (see also section 4), the motor
will never overheat. The performance is
reduced to such an extent that there is no
chance of any damage. Very rarely (e.g.