Download Fox user manual

Invacare® Fox™
5.2.2 Adjusting the height of the remote (only for
swing–away remote holders)
5.3 Adjusting the height of the armrests
Tools:
• 6 mm Allen key
1.
2.
3.
Loosen the Allen screw A.
Adjust the remote to the desired height.
Re-tighten the Allen screw.
5.2.3 Swivelling the remote to the side
1.
2.
3.
Loosen wing screw A.
Adjust armrest to desired height.
Re-tighten wing screw.
5.4 Adjusting the width of the armrests
Tools:
• 8 mm Allen key
If your mobility device is fitted with a swing-away remote holder,
then the remote can be moved away to the side, for example, to
drive up close to a table.
24
1577074-B