Download universal cooling system pressure test kit

OPERATING INSTRUCTIONS
WARNING:
Before removing the vehicles Cooling System Cap be aware the system may be
pressurised with very hot coolant. Remove cap carefully.
The Draper Cooling System Tester is supplied in a secure carry case containing; a
Pump, Hose, and Universal Adaptor. Individual adaptors are available separately for
certain bayonet or screw fitting caps. Where the universal adaptor is not suitable.
To pressurise the cooling system adjust and insert the adaptor to give a ‘snug’ fit in the
expansion tank or radiator opening, then twist the upper hand wheel clockwise to
expand the rubber bung (see diagram).