1
Download WORKSHOP MANUAL KD 425-2
Transcript
IX DISASSEMBLY OF THE ENGINE Extraction of the camshaft gear Use the extractor number 00365R0010 (fig.5). 5 Extracting crankcase bushes From crankcase (fig.6) From main bearing (fig.7) Use extractor number 00365R0900. 6 7 Extracting the oil pressure indicator plug Loosen the plug securing screw, and remove circlip, spring and ball. Cut a thread on the inside of the plug body and then withdraw it using a commercial extractor tool (fig. 8). 8 - 18 - KD 425-2 Workshop Manual_cod. ED0053029360_1° ed_ rev. 00
