Download local copy

The Ultimate Mod, An Electronic Cruise Control For Your FI Vulcan
12/04/2005 12:55 AM
Picture 4
Picture 5
Modified
Inner
Cover With Modified
Modified Inner Cover With Vacuum
Inner Cover With All Parts Installed.
Canister Installed. Note Foam Pad Bracket And Vacuum Canister Installed Note "Yellow Box" for Speedometer
Acting As Spacer and Rattle Inhibitor
Recalibration In Center. Check Valve
is Behind Servo
Picture 4
Picture #8
Switch Box Installation Using Bracket
#3
Picture 6
Shows Detail Of Cable Routing Under
Right Air Box And Into Bracket #2 .
Note Chain At End Of Cable
Connected To Bracket #1
Picture #9
http://gadgetjq.com/electronic_cruise.htm
Picture #7
More Detail Of Cable Routing,
Brackets And Chain Connection.
Picture #11
Picture #10
Showing Spacers Used Behind
Template For Inner Side Cover Mod. Modified Side Cover To Allow Space
Note Hole Drilled For Vacuum Hose, For Zip Ties And Servo Bracket Bolts.
Foam is Padding For Vacuum Canister
Page 12 of 15