Download Manual - TRS RenTelco

DIAGnostic
SMR
:DIAGnostic:INFO:MODules?
The command queries the modules existing in the instrument with their model and
state-of-modification numbers. The response supplied is a list in which the different entries are
separated by commas. The length of the list is variable and depends on the equipment of the
instrument. Each entry consists of three parts which are separated by means of blanks:
1. Name of module
2. Variant of module in the form VarXX (XX = 2 digits)
3. Revision of module in the form RevXX (XX = 2 digits)
Example
Response: ROSC VAR01 REV00
:DIAG:INFO:MOD?
:DIAGnostic:INFO:OTIMe?
The command reads out the internal operating-time counter. The response supplies the number
of hours the instrument has been in operation.
Example:
Response: 19
:DIAG:INFO:OTIM?
:DIAGnostic:INFO:SDATe?
The command queries the date of software creation. The response is returned in the form year,
month, day.
Example:
Response: 1992, 12, 19
:DIAG:INFO:SDAT?
:DIAGnostic:[:MEASure]
The commands which trigger a measurement in the instrument and return the measured value
are under this node.
:DIAGnostic[:MEASure]:POINt?
The command triggers a measurement at a measuring point and returns the voltage measured.
The measuring point is specified by a numeric suffix (cf. service manual).
Example:
1104.3430.12
Response: 3.52
:DIAG:MEAS:POIN2?
6.8
E-1