Download Installation Instructions

Kit Contents
*Important* Verify you have all of the kit components before
beginning installation.
1
Parking Brake Bracket
1
Parking Step Spacer
1Loctite
2
8-3/8 x 18 Zip Tie
1
Bolt Pack 284
Strut Spacer Contents
8
14mm x 140mm bolt
QtyPart
8
12mm x 70mm bolt
8
9/16" SAE flat washer
8
1/2" SAE flat washer
1
Bolt Pack 285
2
3/8"-16 x 3/4" bolt
4
3/8"-16 x 1" bolt
14
3/8" SAE washer
6
3/8"-16 lock nut
2
10mm x 30mm flat head bolt
2
10mm x 30mm SHCS
1
7/16"-14 x 1" bolt
2
7/16" SAE washer
1
7/16-14" lock nut
2
5/16"-18 x 1/2" self-tapping bolt
2
2
1
Strut Spacer
Weld on Steering Stops
Bolt Pack
6
10mm Flange Nut
Body Lift Kit Contents
QtyPart
8
8
2
1
1
1
1
3" Diameter body block
2" Diameter body block
Front Bumper Bracket
Lower Facia Bracket - Drv
Lower Facia Bracket - Pass
Rear Bumper Bracket - Drv
Rear Bumper Bracket - Pass
Important—measure
before starting!
Measure from the center of the
wheel up to the bottom edge of
the wheel opening
LF__________ RF__________
STRUT SPACER INSTALLATION INSTRUCTIONS
»»P
re-Installation
1.
Park vehicle on clean and level surface. Block the rear wheels for safety.
2.
Measure the ride height of the vehicle from the center of the wheel to the fender
and record.
3.
Raise the front of the vehicle with a hydraulic jack. Support the frame rails with
jack stands.
»»I
nstallation Instructions
LR__________ RR__________
1.
Remove the front wheels.
2.
Remove the sway bar links from the vehicle. They are attached with a through
bolt. Save all components for re-installation. Figure 1
Figure 1
C1257 Installation - pg. 2