1
Download Attachment
Transcript
In order to obtain this solution, the following equipment is required: • Microwave PNA series network analyzer with Options H11, UNL, 014, 080, and 081 • N5260A millimeter-wave controller • Millimeter-wave VNA frequency extension modules from Agilent or Oleson Microwave Labs Figure 7 shows a PNA banded millimeter-wave solution applied to an outdoor antenna measurement. The transmit side (left) uses an OML Transmit/Receive (T/R) module, and the receive side (right) uses the OML Dual T module. Dual T modules are ideal for measuring both vertical and horizontal polarities of the antenna. Use of the T/R module also allows voltage standing wave ratio (VSWR) testing of the AUT. Figure 7. Typical millimeter-wave antenna application For additional information about millimeter measurements, see Application Note 1408-15: Banded Millimeter-Wave Measurements with the PNA, literature number 5989-4098EN. 11
